Klasse A-versterker van 20 Watt

Status
Not open for further replies.
Jump to Latest
#22
Jay,

you might want to see the schematic of the mosfet design of John Linsley Hood.
That was designed by him in 1989 with Hitachi mosfets in the output section.
Runs on 35 volt rails for something like 35-40 watts continuous output power, designed to be used in (partial) class A but the output power is scalable.
Your precious mosfets would be perfect for it, you can try googling for the design.
If you wish i can send you the AE article with the design as well.
(easier is to just send a personal message, that way you need not post your email adress here)
 
#23
jacco vermeulen said:
Jay,

you might want to see the schematic of the mosfet design of John Linsley Hood.
That was designed by him in 1989 with Hitachi mosfets in the output section.
Runs on 35 volt rails for something like 35-40 watts continuous output power, designed to be used in (partial) class A but the output power is scalable.
Your precious mosfets would be perfect for it, you can try googling for the design.
If you wish i can send you the AE article with the design as well.
(easier is to just send a personal message, that way you need not post your email adress here)
Click to expand...

I posted that schmt several months ago-with silly question "what ya think 'bout this?"....
seems that nobody was pleased with that schmtc.....
 
#27
Thanks peranders! I just realized that my email is [et]plasa[dot]com NOT [et]telkom[dot]net :bawling: :bawling: :bawling:

I thought I was not the only one who couldn't be reached by the registered email so I wrote on forum. I have never disabled it anyway 🙁
 
Status
Not open for further replies.
Top Bottom