When trying to power up the amp it draws excessive current .
I checked all outputs and power supply fets they all test fine .
Only thing I noticed is on the power supply fets between gate and source legs I get 47 ohms I think that’s normal for this amp .
Any ideas since I can’t seems to find anything shorted
I checked all outputs and power supply fets they all test fine .
Only thing I noticed is on the power supply fets between gate and source legs I get 47 ohms I think that’s normal for this amp .
Any ideas since I can’t seems to find anything shorted
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- General Interest
- Car Audio
- JL Audio 1000/1