Bedroom is a closed in large 2 car garage
Have got all the panels cut for one speaker
Have a pair of FE206's that were given to me going to try them out.
This is my first full range speaker build,I wanted to try these.
I have built 2 cornscala's some WO32's and a custom center for my HT'
I love horn loaded speakers and this seemed like a good build to start with.
Have got all the panels cut for one speaker
Have a pair of FE206's that were given to me going to try them out.
This is my first full range speaker build,I wanted to try these.
I have built 2 cornscala's some WO32's and a custom center for my HT'
I love horn loaded speakers and this seemed like a good build to start with.
Have got all the panels cut for one speaker
What kind of plywood did you use?
dave
There are simulations of the 206 in both the Jericho and the Jericho 08 at Hilfe bei Hornberechnungen bitte!, Lautsprecher - HIFI-FORUM
Sure we just got a bunch of snow and am stuck at home.Soon as I can get to BIL shop will take some and post them up.Can yousnap some pics?
Puhleeeeeez!!!
I have built Accousta 115, a bit smaller but with similar foldning geometry. I strongly suggest that you have braced betwen the back plate and the internal baffle. Internal braces running along the middle of the other internal baffles is also a good idea.
Or go concrete duelund
Or go concrete duelund
Thanks for the tip! I took a closer look at the design and cut some brace's for both panels made whole box very strong and tightI have built Accousta 115, a bit smaller but with similar foldning geometry. I strongly suggest that you have braced betwen the back plate and the internal baffle. Internal braces running along the middle of the other internal baffles is also a good idea.
Or go concrete duelund
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Loudspeakers
- Full Range
- jericho speaker input