Yes they are the same driver. The HPL doesn't have the 2226 metal decal nameplate on the back. Just uses a white stencil marking.
Rob🙂
Rob🙂
issues with 2226
HI
Over a period quite a few 2226 has been opened up by us - demagnetizing the motor and opening of top & bottom plates (for mods) , these have been noticed -
1) the magnetic flux gauss is way below the printed figure
2) there have been issues with suspension linearity to printed figures
3) some of the top plates were not tightly machined and the magnetic gap was large - leading to vc heat & compression
good things
1) the cone does not tears it self out like p audio or other copies
2) the tonal quality
3) when multiple drivers are used - sound dinstinct
suranjan
HI
Over a period quite a few 2226 has been opened up by us - demagnetizing the motor and opening of top & bottom plates (for mods) , these have been noticed -
1) the magnetic flux gauss is way below the printed figure
2) there have been issues with suspension linearity to printed figures
3) some of the top plates were not tightly machined and the magnetic gap was large - leading to vc heat & compression
good things
1) the cone does not tears it self out like p audio or other copies
2) the tonal quality
3) when multiple drivers are used - sound dinstinct
suranjan
thank you all for the replies.
i found out that the hpl is in the speakers and the h is a standalone driver
but they are the same.
i found out that the hpl is in the speakers and the h is a standalone driver
but they are the same.
- Status
- Not open for further replies.