After deciding not to go with the CSS fr125sr in a TL, I decided I would try a cheaper alternative.
I chose the Dayton rs100-4 and nd20fb-4 for the flattest response (Zaph|Audio) and small size. A sub can come later.
I'm thinking of putting these in a BiB-like enclosure, except smaller and with the driver on the wide section. A port will be at the thin end.
Crossover at 3,000Hz or 3,500Hz.
Is this combination good for around $50 per speaker?
I chose the Dayton rs100-4 and nd20fb-4 for the flattest response (Zaph|Audio) and small size. A sub can come later.
I'm thinking of putting these in a BiB-like enclosure, except smaller and with the driver on the wide section. A port will be at the thin end.
Crossover at 3,000Hz or 3,500Hz.
Is this combination good for around $50 per speaker?