It would be a little "Karlson style" midrange test box for an 8 inch speaker. (B&C 8PL21)
Construction = 1/2" plywood.
The driver would front mount on its baffle.
The aperture "wings" screw to sturdy 3/4"x3/4" cleats as will have pretty strong input peaks.
It does not have to look "pretty" nor have any finish but should be reasonably square and strong.
I've tried many times over the last year to contact my regular builder but assume he's busy farming.
I live at 25701 if that's help on seeing if shipping is OK
Construction = 1/2" plywood.
The driver would front mount on its baffle.
The aperture "wings" screw to sturdy 3/4"x3/4" cleats as will have pretty strong input peaks.
It does not have to look "pretty" nor have any finish but should be reasonably square and strong.
I've tried many times over the last year to contact my regular builder but assume he's busy farming.
I live at 25701 if that's help on seeing if shipping is OK
Attachments
No, but i do have a set of X’s 0.53 Kaslrlson in the give away pile. I have the TB that were in them too (not free, but cheap).
dave
dave
Maybe check this guy out in Atalnta: Pair Onken 360L Speaker Cabinets In Walnut, Oak, Altec 604, 416, 515, Will Ship! | eBay
ebay name is audiorecycler-5
ebay name is audiorecycler-5
that's a cool giveaway as cabinets are often the most expensive
and most difficult thing to source.
and most difficult thing to source.
