I am not shure, but i think the "G" parts had a higher power dissipation number or some thing..might be other differences also.
Yes it seems the G verision can take 70w and the one without the G 50w.
Nothing to worry about here then.
Kan KSA1220 (obselute at mouser) be substituted by MJE350?
Or anyone have a couple to sell
Or anyone have a couple to sell
Last edited:
I am in the same shoe. Digikey showed 500 something in stock, but it actually had none.
I am thinking about Toshiba TTA004B as replacement.
I am thinking about Toshiba TTA004B as replacement.
I ordered some KSA1220AYS from a reliable eBay seller. There were 0 at Mouser, and marked EOL. Search was “item not found” at Digikey.
Nearly Ake,
I think the mail out to here is still on holiday/covid or just slow, but hopefully, any day now!
I think the mail out to here is still on holiday/covid or just slow, but hopefully, any day now!
I'd like the last set after you've confirmed all the orders have been received, if it is not already claimed.
Thanks, - David
Thanks, - David
There is on guy before you..
Think of this you can order boards from (Where I ordered them from) PCB Prototype & PCB Fabrication Manufacturer - JLCPCB
If you order 5 or 10 peaces you can sell the rest ,it should be easy as it still seems to be a demand of them. It´s easy to order just upload the gerber file and select color and how many you want.
Think of this you can order boards from (Where I ordered them from) PCB Prototype & PCB Fabrication Manufacturer - JLCPCB
If you order 5 or 10 peaces you can sell the rest ,it should be easy as it still seems to be a demand of them. It´s easy to order just upload the gerber file and select color and how many you want.
Hi Åke,
Trying to catch up with all the developments - these two daughter boards seem very popular. I've ordered the transformers, next will the M2x boards, then parts for stuffing. Thanks for the files and the link to the manufacturer. Never ordered boards before. A friend at work does it all the time so I'll pick his brain next week. But first, need to recover from my vaccine shot (#2 - Pfizer): a bit achy and fatigued. So lucky to have received it!
Trying to catch up with all the developments - these two daughter boards seem very popular. I've ordered the transformers, next will the M2x boards, then parts for stuffing. Thanks for the files and the link to the manufacturer. Never ordered boards before. A friend at work does it all the time so I'll pick his brain next week. But first, need to recover from my vaccine shot (#2 - Pfizer): a bit achy and fatigued. So lucky to have received it!
I had never ordered pcb´s before I did this GB but its easy..
I have also ordered mainboard and I´m waiting for it.
I have also ordered mainboard and I´m waiting for it.