International Rectifier Schottky diodes

[KevinLee]

I have some IR 40cpq100 diodes for sale.

40 amp rating. TO-247 package. 100volt.

$2.00 usd each. Pay by Paypal.

E-mail with questions.

Thanks

KevinLee

 

[KevinLee]

I have lowered the above listed diodes to $1.00 USD each.

Please e-mail with any questions.

Thanks

KevinLee

 

[KevinLee]

Anybody willing to trade?

I am always looking for good caps and I also currently need a 50K alps or noble volume control pot.

Thanks

KevinLee

 

[kasra]

it isnt possible to email you, so please email me =D

I was thinking of using those in a pair of aleph monos, is it a good idea?

4 diodes for each winding, and i se that they are parallelld in the capsle? but is it possible to just use one of the diodes in the TO-247... or can one even benefit from parallelling the 2 diodes functioning as one?

/kasra

 

[KevinLee]

Hello Kasra,

I replaced a bridge in my amp using (4) TO-247 diodes, using one of the internal diodes per TO-247.

You could get away with using (3) of these TO-247 diodes to rebuild a bridge.

I would only be guessing, but I presume if you paralled the diodes your amperage ratings would go up. Maybe some one with a bit more experience with these kind of diodes can let us know.

I was happy with the sound after a few days of break-in. I also used snubbers.

Thanks

KevinLee

 

[icceman]

I'm using them for my Aleph 5 dual mono. 16 x 40CPQ100 (connected in parallel to give 40A) and they runs at about 50C (room temp is 30C).

 

[KevinLee]

Hello,

I still have some of these diodes.

It will cost only $4.00 (for 4 pieces) to replace the old bridge in your amp or try these in your new project.

KevinLee

 

[GaryB]

Kevin,
I'm interested but can't seem to send you email. Please email me with contact information.
Thanks,
---Gary

 

[KevinLee]

Hello GaryB,

I have enabled my e-mail. Please get in touch with me.

Thanks

KevinLee

 

[KevinLee]

Hello,

I still have about 50 of these left. If you want to trade, let me know what you have.

Thanks

KevinLee

 

[KevinLee]

Hello All,

I received another 100 of these diodes and have them for sale.

I thank all the members who have purchased these so far.

Any feedback on their performance in your project?

Thanks

KevinLee🙂

 

[Piersma]

Snubber circuit

Hi all,

Do you still need a snubber when using this Schottky diodes in your PSU. If so what snubber are you using ?
Only a small ceramic cap ?

Any comments would be appreciated.

Regards from the Lowlands
Piersma

 

[KevinLee]

Piersma,

I use .01uf COG/NPO ceramic as snubbers. I have had no problems.

Has anyone used film caps?

Thanks

KevinLee🙂

 

[hieroglyphics]

Kevin, I'm interested in buying a few of those from you. And shipping should be relatively inexpensive 😉

I'm a third year E. engineering student, but this will be my first time making a supply (or anything for that matter). So I don't know exactly how many (I'm guessing at least four).
I'm just finishing one of my two summer courses right now so is it possible we could meet next week? Please let me know,

Dan

 

[KevinLee]

Hello Dan,

I have been away for the last week, sorry I did not get back to you sooner.

I do have some of these diodes left if you are interested.

Let me know.

Thanks

Kevin🙂

 

[KevinLee]

Hello All,

I have 50 of these left and want to move them.

First person to PayPal $35.00 USD will receive them shipping included. North America Only. An extra $5.00 for Europe.

Thanks

KevinLee

🙂

 

[KevinLee]

Hello,

Down to 30 pieces. $20.00 shipped in N. America.

PayPal only.

Thanks

Kevin

 

[KevinLee]

All pieces sold,

Thanks

Kevin