I'm building F5 amplifier and want to use CRC schematic in PSU.
For inductors I have 1mH coils with only ten turns on a ferrite ring. So the magnetic conductivity of that ring is very high. I know that such inductors are unacceptable in loudspeaker crossovers because of their bad hysteresis but what's about PSUs?
For inductors I have 1mH coils with only ten turns on a ferrite ring. So the magnetic conductivity of that ring is very high. I know that such inductors are unacceptable in loudspeaker crossovers because of their bad hysteresis but what's about PSUs?
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.