I was wondering if anyone knew of a particularly good source for professional looking power buttons or switches, preferably illuminated. I've shopped around at Parts Express, Digikey, etc., but most of what I've seen isn't very good, or it didn't handle AC, and they weren't illuminated.
I had no luck in this regard myself.
However, I offer one caution:
Be clear whether you mean
A- the switch glows even when off so you can find it in the dark, or
B- the light only comes on when the switch is "on".
The phase "illuminated switch" often refers to option A. This has industrial uses and is not uncommon but is not what I was looking for, so I'm guessing you are not looking for it either.
If you really DO want type A, www.digikey.com has them.
However, I offer one caution:
Be clear whether you mean
A- the switch glows even when off so you can find it in the dark, or
B- the light only comes on when the switch is "on".
The phase "illuminated switch" often refers to option A. This has industrial uses and is not uncommon but is not what I was looking for, so I'm guessing you are not looking for it either.
If you really DO want type A, www.digikey.com has them.
Good looking switches are hard to find at a decent price. Most of the time I use non-illuminated switches with a seperate LED on its own pole of the switch.
Lighted switches
Look on my website www.apexjr.com
under the movie props. I sell lamp sockets and lighted
push button switches to the movies for props and blinking
background lights...Good selection and prices.
Steve @ Apex Jr.
Look on my website www.apexjr.com
under the movie props. I sell lamp sockets and lighted
push button switches to the movies for props and blinking
background lights...Good selection and prices.
Steve @ Apex Jr.
I am getting email and just a response from this forum
that you have responded. I have Teflon tubing in rolls
these are not listed on the website, what size are
you interested in. I'll need to check my warehouse to see
what I do have .... Steve @ Apex Jr.
that you have responded. I have Teflon tubing in rolls
these are not listed on the website, what size are
you interested in. I'll need to check my warehouse to see
what I do have .... Steve @ Apex Jr.
I'm interested in the following sizes: 16AWG and 14AWG
What colors are available?
And how much does it cost for each meter?
What payment methods could I use?
Please reply to the following:
sendtojamesj@hotmail.com
Because it doesn't belong to this thread🙄
Thanks,
JayJay
What colors are available?
And how much does it cost for each meter?
What payment methods could I use?
Please reply to the following:
sendtojamesj@hotmail.com
Because it doesn't belong to this thread🙄
Thanks,
JayJay
- Status
- Not open for further replies.