as above.
I've used it in the past to connect PCBs or connect transformer primaries to IEC connectors without having to solder the wires.
Thank you.
I've used it in the past to connect PCBs or connect transformer primaries to IEC connectors without having to solder the wires.
Thank you.
There are lots of brands and types, For reliability and proper fit, only use mating connectors
of the same brand that are designed for each other.
of the same brand that are designed for each other.
Also known as a Quick Connect connector (or QC terminal).
As @rayma says, beware of the different sizes. Common sizes are 1/8, 3/16, and 1/4 inches in width and 0.51, 0.81 mm thickness. I forget what 0.51 and 0.81 translate to in Murica metres, but it's some inch fraction.
Tom
As @rayma says, beware of the different sizes. Common sizes are 1/8, 3/16, and 1/4 inches in width and 0.51, 0.81 mm thickness. I forget what 0.51 and 0.81 translate to in Murica metres, but it's some inch fraction.
Tom