ideas for budget 2 way active amp/processor?

Just wondering what you're looking for.

The Zoudio AIO4CH have all the functions you're asking for, and they have a matching BMS to go with, in case you're thinking of putting together a LIPO pack for it.
You can even get a nice plate there so it's basically a complete 4ch plate amp with DSP and bluetooth receiver in case you want that as well.

You'd need a matching PSU to charge the batteries (or to just power it without batteries) but that's the easy part.

ZOUDIO electronics

ZOUDIO AIO4CH: 4-channel amplifier with DSP and Bluetooth
 
Is this for a set of home or car audio speakers? If it’s home speakers , I have a pair of two channel amp boards and the power supply’s . The amp boards are setup to use as a two way system, 1 channel is for the tweeter ( high ) and 1 channel is for the woofer ( lows )
You can mount them inside or outside the speaker box. Just make up a power cable for each power supply/ then run two wires to the board, hook up 1 rca cable, and run the speaker wires to the high and low side output of the amp board, easily done
If this is something you’re interested in send me a message and we can work out some type of price. These are brand new never been used, they have the crossover built-in and individual volume pots built into the board
IMG_6373.jpg
IMG_6376.jpg
IMG_6377.jpg
IMG_6380.jpg
IMG_6379.jpg
IMG_6375.jpg
IMG_6370.jpg
IMG_6366.jpg
IMG_6368.jpg
 
Just wondering what you're looking for.

The Zoudio AIO4CH have all the functions you're asking for, and they have a matching BMS to go with, in case you're thinking of putting together a LIPO pack for it.
You can even get a nice plate there so it's basically a complete 4ch plate amp with DSP and bluetooth receiver in case you want that as well.

You'd need a matching PSU to charge the batteries (or to just power it without batteries) but that's the easy part.

ZOUDIO electronics

ZOUDIO AIO4CH: 4-channel amplifier with DSP and Bluetooth

THIS is amazing. Basicly everything I need in 1 package (minus the PSU) Any idea when they will be back in stock ??
 
Is this for a set of home or car audio speakers? If it’s home speakers , I have a pair of two channel amp boards and the power supply’s . The amp boards are setup to use as a two way system, 1 channel is for the tweeter ( high ) and 1 channel is for the woofer ( lows )
You can mount them inside or outside the speaker box. Just make up a power cable for each power supply/ then run two wires to the board, hook up 1 rca cable, and run the speaker wires to the high and low side output of the amp board, easily done
If this is something you’re interested in send me a message and we can work out some type of price. These are brand new never been used, they have the crossover built-in and individual volume pots built into the board
View attachment 873341
View attachment 873342
View attachment 873343
View attachment 873344
View attachment 873345
View attachment 873346
View attachment 873347
View attachment 873348
View attachment 873349

any more info on those items?
 
Here’s a few pics that may help you
As you can see , each board as a led clip light for the woofer and tweeter and a small volume pot control. As for the crossover setting for them, I don’t know. If you can look up the maker of the boards and the model maybe that would tell you, but I think it’s somewhere around 2k or 2.2k
I have two boards and two power supply’s
They are small so they can with be installed inside the speaker box or you can make a case for them
I hope this helps. I’ll dig them out of what ever box I have them and try to help you research them. I do know that the fourm member that sold them to me is one of the higher level diy’er for making of diy audio amps
IMG_7750.jpg

IMG_7751.jpg
IMG_7752.jpg
IMG_7753.jpg
IMG_7754.jpg
IMG_7755.jpg
IMG_7756.jpg
IMG_7757.jpg
IMG_7758.jpg
 
I think I found the manual paper for here’s a link for I hope this helps.
I think this is the wrong paperwork on these boards. Mine at the m2 and the link is to the D2 boards
I just emailed them and asked if they could help me find the right link to a pdf file about these boards, I do know that they send 40 watts to each driver. As for the crossover setting, I may be able to hook up my scope and see what it shows.


http://www.xkitzconnect.com/files/XAMP-M2_Instr_Manual.pdf
 
Last edited: