I Want To Build A Amplifier

[Dj BASS AMP]

FORM THE "stk4050V" IT IS A 200W ~ 8Ohm amplifier
and 0.08% THD it is good for AMP???
and there Semiconductor or TDA or LM or STK STRONGER???
that easy to build?????

 

[Vivek]

Hi,
I built an STK 4171-based amp and it sounds pretty good.
Regards,
Vivek

 

[e96mlo]

0.08% THD is quite OK. Especially at 200 W with such a simple circuit.

/Marcus

 

[Dj BASS AMP]

THERE HAVE STK STRONGER OR OTHER PART??? THAN 200W AT SIMPLE circuit??

THERE HAVE STK STRONGER OR OTHER PART??? THAN 200W AT SIMPLE circuit??
IF U ANSER THANKS!!!
I USE IN STK4050V

 

[e96mlo]

I think you have Caps Locked your computer...

STK4050V is the most powerfull device that I have seen so far from Sanyo. Only problem is that it is discontinued and can be hard to get in the future.

/Marcus

 

[Dj BASS AMP]

and...

LM12CLK it is good for amp??

is 120W 0.01%THD

I WANT to build a powerfull amp in simple circuit LIKE THE STK
U HAVE same ?

AND THERE device that STRONGER THAT STK4050??

SORRY MY ENGLISE IS DON'T WELL...

 

[e96mlo]

Capital letters is the same as shouting when you post something in a forum. Not good.

STK4050V is the biggest. But you can use TDA7293 in bridge/parallel mode and get some more power. That can be done with the LM3886 aswell.

/Marcus

 

[Dj BASS AMP]

thanks!!!

and....

LM12CLK (LM12)
in bridge i can get 240W 0.01% THD in 8 Ohm

it is good?? for powerfull amp
it is need very simple circuit

 

[hugobross]

I Want To Build A Amplifier

like a lot of DIYers over here

 

[e96mlo]

The LM12 is quite expensive where I live, at least compared to STK4050V and TDA7293. I wouldn't use it.

/Marcus

 

[Dj BASS AMP]

The STK4050 are better!

*all the parts is in 8 ohm spk

STK4050V = 0.08% THD ~ 200W ~ 66V

STK4048XI = 0.008% THD ~ 150W ~ 60V

LM12CLK = 0.01% THD ~ 120W ~ 38V

TDA7293 = 10% THD ~ 100W ~ 50V

i will us in STK4050V is The BEST!!

 

[paulb]

Make sure you use a large heatsink. It can be difficult to keep amps like that from getting too hot.

 

[cowanrg]

what do you need such power for?

 

[Dj BASS AMP]

I want such powerfull Amplifier to My Dj

I want to build HIGH POWER amp to dj SPK'

i will build amp 4x200w 8 OHm

70v~18A THE POWER with 4 FAN's on the STK4050's