I need to find this 3.5 jack socket

[Antenore]

Hi everyone, I can't find anywhere this kind of jack socket (it's an old Creative's system). Any ideas on where I can find it?

 

[JonSnell Electronic]

Maybe if you resoldered the dry joints, you wouldn't need to replace it?

 

[Enzo]

Agree^^^^

 

[Antenore]

I've already tried. The problem must be inside

 

[Samsara]

Hello.
It's PJ-306B connector.

5PCS 3.5mm Female Audio Connector 5 Pin DIP Headphone Jack Socket PJ 306B-in Connectors from Home Improvement on Aliexpress.com | Alibaba Group

 

[Antenore]

Thanks Samsara! It's exactly the same!

 

[turk 182]

well if your certain its the jack why not find a substitute and wire it to the board, physical space provided.

but i'm on side with Jon and Enzo without being able to magnify the image more i would say there's some bad solder joints (ground and a few pins around the jack area)
just re heating and adding some solder doesn't guaranty it's fixed if it was bad for a while oxidation sets in and can resist a quick touch up unless you insure the two surfaces (pin and pad) are contaminant free.

 

[Enzo]

I can see cracked solder in your photos. If you took them before resoldering them, fair enough, but if they were taken after repair attempts, then they need to be resoldered.