I Need Help, PLEASE!

[reodds]

Hi Everyone, To make a very long story as short as possible, I bought a Soekris DAM1021 v1.1 on February 1, 2015. Due to many moves, and very little free time, the project was "lost" in one of our hundreds of boxes for almost 10 years, until the other day when it was "found"!

I have the main Soekris Board, as well as a Normundss Input Board, Front Panel Board, an STM32 Board, a USB Board, and some hardware.

Can anyone direct me to a complete build thread, or at least a parts needed list, in addition to an appropriate enclosure that can be used?
Your help in completing this long overdue project is greatly appreciated!

Roger

 

[Markw4]

Maybe something like this would help: https://hifiduino.wordpress.com/2015/03/16/soekris-dam-1021-r-2r-dac-users-guide/

 

[reodds]

Thank you Sir, that's one heck of a guide! Do you or anyone else have a recommendation for an off the shelf case that will work well with the project?

 

[jordheis]

Maybe this? https://www.diyaudio.com/community/...-magnitude-24-bit-384-khz.259488/post-6799276

ref search: https://www.diyaudio.com/community/search/2036440/?q=enclosure&t=post&c[thread]=259488&o=relevance

 

[andyjevans]

I like diecast aluminium cases - very easy to drill and work with. If I need more space I just use two and divide the circuit between them, usually the PSU in one. Easy to stack them one on top of the other. Smaller sizes also available.

Hammond 1550J IP54 Diecast Aluminium Enclosure 275 x 175 x 67mm
https://www.rapidonline.com/hammond...m-enclosure-natural-275-x-175-x-67mm--30-4375