What size punch amp is this ? I tried googling gut shots and can't find it.
thanks
thanks
Attachments
i looked at that badge under a magnifying glass and couldnt see anything., the camera light must have brought it out . I didn.t see that at all 551s Thanks alot caraudioguy
No way I can run it bridged at 2 ohms right ?
No way I can run it bridged at 2 ohms right ?
Last edited:
I wouldn’t run it at 2 ohms bridged .
Those amps will blow of run below a 4 ohm bridged
People say you can do it personally I wouldn’t .
Those amps will blow of run below a 4 ohm bridged
People say you can do it personally I wouldn’t .
Board # 4340?
The 4340 is used in the 551S and a schematic labeled 500a2. Rockford used the same board in multiple models.
Running it in 2 ohm mono is very risky. If you need to bridge it because you need more power, it likely won't survive.
The 4340 is used in the 551S and a schematic labeled 500a2. Rockford used the same board in multiple models.
Running it in 2 ohm mono is very risky. If you need to bridge it because you need more power, it likely won't survive.