I'm working on an Autotek SX1500.1.
It's the one with the big slab of chrome on the top.
The digital driver IC 3 is shorted. (Suckes the -15v way low)
Of course the ID on the chip has been ground off and Maxsonics won't offer a schem to a non warranty tech.
They're telling me that parts for these models are no longer available anyway. (I get the impression they don't want to help?)
It's a 20 pin DIP mounted on a socket located just about in the middlee of the board.
I may be out of luck on this one.
Thanks,
It's the one with the big slab of chrome on the top.
The digital driver IC 3 is shorted. (Suckes the -15v way low)
Of course the ID on the chip has been ground off and Maxsonics won't offer a schem to a non warranty tech.
They're telling me that parts for these models are no longer available anyway. (I get the impression they don't want to help?)
It's a 20 pin DIP mounted on a socket located just about in the middlee of the board.
I may be out of luck on this one.
Thanks,
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.