Hey all. I recently started having sound issues with my Laney Ironheart 60 amp. I noticed sometimes when I use the clean channel I get a kind of crackling (random pops), but on the gain channels (rhythm and lead) there was no issue. But recently I started having a buzzing sound on these channels, but only when a guitar is plugged. I made a video to document the issue:
So here's things I did to try to diagnose the issue.
1- Buzz sound:
Thanks.
So here's things I did to try to diagnose the issue.
1- Buzz sound:
- There's buzz only when a guitar is plugged in.
- Unplugging the guitar stops the buzz.
- The buzz is present with any of my guitars.
- Reducing the volume on the amp reduces the buzz.
- Reducing tone from the tone knob on my guitar significantly reduces the buzz.
- On the clean channel there's crackling/popping sound.
- Plugging a guitar adds a buzz to the crackling.
Thanks.
This sounds very much like a bad cable having its shield damaged.The buzz is present with any of my guitars.
Hugo
Yep. Turns out I had two faulty cables + interference from a wifi router in the same room.This sounds very much like a bad cable having its shield damaged.