Hi,
I am new in this forum. I need help from you guys. I am intending to make a power audio amplifier. I had Visited few web site and saw there are many circuit design about 100w using transistor. But I need to know which type of transistor will be high quality sound with reasonable price. There is mosfet or drilington type of transistor. Any one can suggest me which will be batter to make A class quality power amplifier? I don’t want to use valve type. I need 100w RMS power into 8ohms speaker.
Thank you for your help.
I am new in this forum. I need help from you guys. I am intending to make a power audio amplifier. I had Visited few web site and saw there are many circuit design about 100w using transistor. But I need to know which type of transistor will be high quality sound with reasonable price. There is mosfet or drilington type of transistor. Any one can suggest me which will be batter to make A class quality power amplifier? I don’t want to use valve type. I need 100w RMS power into 8ohms speaker.
Thank you for your help.
100W/ch/8ohm class A amplifier? That's insane!
You do realize the ridiculous amount of heat that is going to generate constantly, right? You're going to be spending more money on heat sinks than anything.
You do realize the ridiculous amount of heat that is going to generate constantly, right? You're going to be spending more money on heat sinks than anything.
Hi,
go and read the KSA100 thread. It's a 100W into 8ohm ClassA power amplifier.
Then decide whether you want to go with BJT or FET
Worth downloading the various PASS amplifiers and papers on various types of ClassA.
go and read the KSA100 thread. It's a 100W into 8ohm ClassA power amplifier.
Then decide whether you want to go with BJT or FET
Worth downloading the various PASS amplifiers and papers on various types of ClassA.
Have a look at some of the kits / amps mentioned here:
http://www.diyaudio.com/forums/showthread.php?s=&threadid=93318&highlight=
http://www.diyaudio.com/forums/showthread.php?s=&threadid=93318&highlight=
needed circuit design for 80 to 100 wats
hi,
Thank you for your helps. I just need 80 to 100 wats rms on 8ohms but the operate voltage should be 30 to 40v+-. I need good sound quality circuit diagram. Those are using transistor in moderate price rate.
Thank you.
hi,
Thank you for your helps. I just need 80 to 100 wats rms on 8ohms but the operate voltage should be 30 to 40v+-. I need good sound quality circuit diagram. Those are using transistor in moderate price rate.
Thank you.
" I just need 80 to 100 wats rms on 8ohms but the operate voltage should be 30 to 40v+-. "
Right, can not be done.
Read the KSA100 thread.
If you really want 100W/8R you will want to use a 35-0-35 transformer of at least 400VA per channel.
Right, can not be done.
Read the KSA100 thread.
If you really want 100W/8R you will want to use a 35-0-35 transformer of at least 400VA per channel.
Re: needed circuit design for 80 to 100 wats
You might have look at SymAsym, it is quite simple. It is intended for +/- 36v and will give you ~60w into 8ohms, the power you get with this supply voltage.
Click my www or search the forum.
Mike
space2000 said:
You might have look at SymAsym, it is quite simple. It is intended for +/- 36v and will give you ~60w into 8ohms, the power you get with this supply voltage.
Click my www or search the forum.
Mike
- Status
- Not open for further replies.