Hi I have a fully optioned 35670A ( 4Ch ) with Basic and operating on a Agilent IEEE488.2 -Lan Network.
I was would like to get the UK4 hardware option but I am stuck for the 7 Pin LEMO microphone.
Opt is 28v or 200v microphone system.
Suggestions in type of mike or amp is required. Also LEMO 7 pin - where do you get a suitable UK4 - LEMP plug?
//Regards nick
I was would like to get the UK4 hardware option but I am stuck for the 7 Pin LEMO microphone.
Opt is 28v or 200v microphone system.
Suggestions in type of mike or amp is required. Also LEMO 7 pin - where do you get a suitable UK4 - LEMP plug?
//Regards nick