Hi!
I remember reading somewhere (I think 6 moons) about a reviewer using an Audiosector Gainclone with headphones, and being pretty chuffed with the quality.
I have the premium Audiosector Gainclone (LM3875), and my headphones are a pair of 64 ohm Sennheiser HD570s.
What would I need to do to run the amp into these headphones, WITHOUT having to change anything internally i.e. so I can still use the Gainclone as an amp?
Many thanks.
- John
I remember reading somewhere (I think 6 moons) about a reviewer using an Audiosector Gainclone with headphones, and being pretty chuffed with the quality.
I have the premium Audiosector Gainclone (LM3875), and my headphones are a pair of 64 ohm Sennheiser HD570s.
What would I need to do to run the amp into these headphones, WITHOUT having to change anything internally i.e. so I can still use the Gainclone as an amp?
Many thanks.
- John
Basically, you don't need to change anything. The forum discussion is here: http://www.diyaudio.com/forums/showthread.php?s=&threadid=62828&highlight=
6moons review: http://www.6moons.com/audioreviews/audiooasis/audiozone_3.html
6moons review: http://www.6moons.com/audioreviews/audiooasis/audiozone_3.html
Thanks Peter - yes I saw both those pages, but neither seemed to state explicitly how to use phones with the amp.
Do I rig up some kind of adapter, so both - speaker terminals are connected to the (single) headphone ground wire, and the left and right speaker outputs to the same in the phones?
Do I rig up some kind of adapter, so both - speaker terminals are connected to the (single) headphone ground wire, and the left and right speaker outputs to the same in the phones?
- Status
- Not open for further replies.