How to make power inductors

[chipco3434]

Keep one hand near the E-stop, eh? Or you might be dancing to "Tangled Up in You".

 

[bobsinclar]

nice ladies indeed...but they need watts😀 that's why I had to DIY
amps and spkrs ....what woman wants.....🙂

they dance, but I still make my coils alone🙁
big up to MAG.
Vince

 

[bobsinclar]

ok no personnal picts, forget first ground and see the DYW JBL 4350 on foreground😀
Vince

 

[jacco vermeulen]

S'il vous plait, no more photos of the brunette, she's saturating my coils.

 

[poobah]

When I see a woman handling wire like that... my heart goes pitter patter...



😀

 

[bobsinclar]

Jacco,
you're experiencing too much DC on main line....I know what you are talking about...
here is my assistant worker checking the JBL cabinet is damped enough😀

 

[poobah]

That photo could get you arrested over here...



🙂

 

[bobsinclar]

😀 😱
Vince

 

[steenoe]

Mr. Magura asked me to post something about making inductors, so here are some photos that you can see how.

Mrs. Magura

Nice work indeed, Mrs Magura. I bet your coils are better than
Mr Magura's😀

🙂


BTW. Collectors item.

 

[Magura]

Re: Re: How to make power inductors

Nice work indeed, Mrs Magura. I bet your coils are better than
Mr Magura's😀

🙂


BTW. Collectors item.

You're soon to find out 😎


Magura 🙂

 

[Magura]

would it be possible to see a closer pic of Mrs. Magura?

Pop in at the BAF 08, and see the original instead 😉


Magura 🙂

 

[Magura]

how do you know how many windings to do to get your target mH value?

in other words, how do you measure mH?


P.S.

any gal that helps with the DIY is a keeper 🙂

I calculate the bobbin size, and the number of turns. This gives results within lower tolerances than my meter. (If wound well and so forth).


Magura 🙂

 

[Magura]

When I see a woman handling wire like that... my heart goes pitter patter...



😀

Ohh, just imagine the 3D version of the scenario 😀


Magura 😉

 

[carpenter]

At first I thought I was going nuts--I mean, look at Magura's beautiful hands, and then I saw his lovely hair--and then I thought I was gay....

And then I saw that it was Mrs. Magura!! I feel better, now.😀 😉 😀

 

[mpmarino]

I calculate the bobbin size, and the number of turns. This gives results within lower tolerances than my meter. (If wound well and so forth).


Magura 🙂

By what method do you calculate, fine madam/sir?

 

[Zen Mod]

By what method do you calculate, fine madam/sir?

Lalena online calculator can be handy ;

but ya always need dreky Lmeter for confirming that you wind way drekier than Master Magura...........




we have now two Maguras - Mister and Master ......

 

[sandstorm33]

ok no personnal picts, forget first ground and see the DYW JBL 4350 on foreground😀
Vince

I dont see any JBL 4350!!!

What is it with you ... first it's trois ... then it's deux????

Unpredictable PARISIANS!!!

 

[mpmarino]

we have now two Maguras - Mister and Master ......

 

[bobsinclar]

Sandstorm,
you don't recognize the 4350 because they are turned upside down with the LF up (and added altec 511 horn on them),also Kitty(my cat) is in the mid frequency cabinet of that same 4350...
I sold them last year, now i have small spkrs😀
Vince

 

[jacco vermeulen]

Kitty is in the mid frequency cabinet of that same 4350...
I sold THEM last year

The cat went along too, as damping ?