I need to build an active subwoofer, that can be connected to a Sony 5.1 receiver, using an 8" in a closed box. I want a small box, that's why I'm not using a 10" or 12" woofer.
As the bass reach down of the speaker I'm considering using (Dayton Audio RS225-8 8" Reference Woofer) is -15dB @ 30Hz, I am investigating using DSP to correct that to -3dB if it's possible.
https://www.parts-express.com/pedocs/specs/295-356--rs225-8-spec-sheet.pdf
I plan to use the subwoofer RCA output to link the DSP. This the one I'm planning to use.
https://www.parts-express.com/Dayto...utm_medium=Impact&utm_campaign=Impact&irgwc=1
So anyone that did something similar or used this DSP, please do jump in and comment.
As the bass reach down of the speaker I'm considering using (Dayton Audio RS225-8 8" Reference Woofer) is -15dB @ 30Hz, I am investigating using DSP to correct that to -3dB if it's possible.
https://www.parts-express.com/pedocs/specs/295-356--rs225-8-spec-sheet.pdf
I plan to use the subwoofer RCA output to link the DSP. This the one I'm planning to use.
https://www.parts-express.com/Dayto...utm_medium=Impact&utm_campaign=Impact&irgwc=1
So anyone that did something similar or used this DSP, please do jump in and comment.