how to make the Zero crossing point reference voltage?
If its 24bit which in general accommodate the entire wave from peak to peak but in signed magnitude its not required. So how do we make the signed magnitude with may be 12 bit R2R ladder
If its 24bit which in general accommodate the entire wave from peak to peak but in signed magnitude its not required. So how do we make the signed magnitude with may be 12 bit R2R ladder
Hi,
Signed magnitude only takes up one bit, a 12bit ladder = 13bit.
rgds, sreten.
https://hifiduino.wordpress.com/2014/10/12/r2r-for-the-rest-of-us/
Signed magnitude only takes up one bit, a 12bit ladder = 13bit.
rgds, sreten.
https://hifiduino.wordpress.com/2014/10/12/r2r-for-the-rest-of-us/
Last edited:
actually sorens dac has got 28 plus 28 for the positive wave and 28 plus 28 for the negative wave so why 28 are used for positive if so one need 1 / 2^28 precise resistor which is not that case.. so how is 0.05% is working without any issues.
now lets consider we need a 24bit signed magnitude R2R.
so lets take two 25bits ladders so how to interleave the magnitude bit.
I have a I2s source so we have LCK, MCK, BCK, DATA so to deal with the signed magnitude any inputs please.
- Status
- Not open for further replies.