Well, the analogy is the same for both. If the signal is too strong, you do what to it......................?
Hint: It "fixes" the impedance problem at the same time.
Anyway......... the only difference is that light boucning back and forth not only causes "echoes", but mode hopping in the laser. Which leads to even more pulse dispersion. Especially if you move the fiber.
Jocko
Hint: It "fixes" the impedance problem at the same time.
Anyway......... the only difference is that light boucning back and forth not only causes "echoes", but mode hopping in the laser. Which leads to even more pulse dispersion. Especially if you move the fiber.
Jocko
We are under disgussion now.
One problem is that one of my friend thinks that Usb is not a good idea because the bandwith is shared with other equipments that use USB .
Also we concluded that we can't sell the FPGA version for a low price because of the high cost of design.
We think we are going to introduce a lower priced kit first using hardware control .
Everything is still under disgussion,and we need some days to come to a conclusion .
One problem is that one of my friend thinks that Usb is not a good idea because the bandwith is shared with other equipments that use USB .
Also we concluded that we can't sell the FPGA version for a low price because of the high cost of design.
We think we are going to introduce a lower priced kit first using hardware control .
Everything is still under disgussion,and we need some days to come to a conclusion .
hence the quote HiEnd DAC kit ! pull down the cost wisely as not to compromise the high end signature.
theres always a bargain for anything that came out of diyaudio 😀
USB option <---- shouldnt give this one up
2cents
theres always a bargain for anything that came out of diyaudio 😀
USB option <---- shouldnt give this one up
2cents
I think the same thing about the USB, I know that some noise can come from the computer ground, but in practice USB will not be always connected or a transformer can be used...
A more than few days have passed 🙂, do we have some decision?
A more than few days have passed 🙂, do we have some decision?
- Status
- Not open for further replies.