Variac,
Your preamp sees the input impedances of your amps in parallel. So if each is 20K, your preamp sees a 10K load. Most solid state preamps can handle this with ease.
You should notice your system sounds even cleaner when you actively biamp.
Your preamp sees the input impedances of your amps in parallel. So if each is 20K, your preamp sees a 10K load. Most solid state preamps can handle this with ease.
You should notice your system sounds even cleaner when you actively biamp.
Can i do the same as variac said for passive bi-amping with no preamp? My amps are maoura penasa Rev_c one pair and rev_a another pair.The input impendance of the amps are 100K.
Thanks
Thanks
Enter,
You can, as long as your source can handle the load. With no buffer you may find that the volume control is not quite the curve that you expect.
You can, as long as your source can handle the load. With no buffer you may find that the volume control is not quite the curve that you expect.
- Status
- Not open for further replies.