HORNRSP help with speaker

[rhythmzdj]

need help have this speaker ,will this work in front loaded horn
how large would box be for around 35hz to 100hz ?
THIELE-SMALL PARAMRTERS
Fs: 36.23 HZ
Re: 6.3 ohm
Qms: 2.823
Qes: 0.476
Qts: 0.407
Vas: 121.67 liters
Sd: 0.0552 m2 <---- where do i enter this in hornrsp
EBP 89.017
Voice Coil Over Hang X-max 7 mm

 

[weltersys]

Sd: 0.0552 m2 <---- where do i enter this in hornrsp

Enter Sd in square centimeters in the Hornresp Sd box, the .0552 m2 is 552 square centimeters.
Have fun with your design, it will be a huge box, and the speaker is not a very good choice for a horn.

 

[bjorno]

need help have this speaker ,will this work in front loaded horn
how large would box be for around 35hz to 100hz ?
THIELE-SMALL PARAMRTERS
Fs: 36.23 HZ
Re: 6.3 ohm
Qms: 2.823
Qes: 0.476
Qts: 0.407
Vas: 121.67 liters
Sd: 0.0552 m2 <---- where do i enter this in hornrsp
EBP 89.017
Voice Coil Over Hang X-max 7 mm

Hi,

Here is a quick made HR template to import using a total volume of~3.8 m^3 for a 32 Hz FLH. (Qt box =0.7). Try keep the FR as smooth as this example when shrinking the size to the target of 35 Hz.

b🙂

 

[bjorno]

FYI:

Hi,

Revealing the undercover driver :

b🙂

 

[rhythmzdj]

thanks