Hello all, having trouble finding this information. I recently recapped my HK 12. I am struggling to find the correct bias settings for it? I see the test points, but... Anyone point me in the right direction? TY!
Adjust for 8 to 13 mV DC across the test points of each channel, after full warm-up.
You'll need a very good DVM for this.
But first verify the (unpowered) resistance value of the four 0.27R resistors.
You'll need a very good DVM for this.
But first verify the (unpowered) resistance value of the four 0.27R resistors.
