Help with REW

[Bmsluite]

Hey everybody,

I just got my whole measurement setup. I started with my 3way I built. I am sure I am doing this wrong. It keeps giving me errors for having the sound too low. Am I somehow set up in nearfield measurement? I have been reading up and watching videos for days on how to do this but each video or article seems to only give me snippets of information. I did read the REW tutorial on the REW page but......that seemed a bit all over the place as well.
Anyways....what am I doing wrong here. Please see screenshots

 

[Bmsluite]

Pics of the hardware setup

 

[Tenson]

I think you need to look at your sound interface settings. You are not getting any input signal. Do you have phantom power enabled?

 

[Bmsluite]

nvm.....was the phantom power not turned on..... I feel dumb....
ANYWAYS.....! Here's the frequency response from the very first 3 way I ever built

 

[Bmsluite]

I think you need to look at your sound interface settings. You are not getting any input signal. Do you have phantom power enabled?

You called it. Was missing phantom power

 

[Bmsluite]

Geo,

I am probably not the right person to answer this but here goes...

You need to measure the drivers impendence and then use the Theile Small Parameter tool in order to get that parameter