Help with impedance measurement.

Hello,
Do you think I need a better usb sound interface for measuring impedance with Arta, I am using a cheap Texas instrument PCM2902. I am not sure if the headphone input is stereo but the data sheet says so.
Or do you think there is something wrong with my connection. I am following the design of the second pic.
 

Attachments

  • 6E0CFF66-26C0-41A9-83D3-88DE5CAC2826.jpeg
    6E0CFF66-26C0-41A9-83D3-88DE5CAC2826.jpeg
    610.3 KB · Views: 96
  • D84CD3A0-4364-4713-A183-CD56F9923D14.png
    D84CD3A0-4364-4713-A183-CD56F9923D14.png
    345.4 KB · Views: 93
  • 680DB332-4F5A-400F-A436-C5F763D422CE.png
    680DB332-4F5A-400F-A436-C5F763D422CE.png
    142.2 KB · Views: 93
use a soundcard with line in / line out connectors
connect the speaker under test via a power amp
check out you setup/calibration with known value resistors first
Hey thanks for replying happy Christmas I will get new sound card I guess, you think there’s any thing wrong with my connection I saw a similar setup but I don’t see where is the connection for the the mic ground in the below pic
 

Attachments

  • D1506974-106E-4729-B56D-E888CD9380CD.jpeg
    D1506974-106E-4729-B56D-E888CD9380CD.jpeg
    949 KB · Views: 54