Hi guys,
I need to insert an EQ curve in the early section of a guitar amp. . Preferably a passive design so that it can be easilly put in between one of the many gain stages(the curve looks a bit tight, though).
Its basically a 'frown' curve, which looks like this:
I need to insert an EQ curve in the early section of a guitar amp. . Preferably a passive design so that it can be easilly put in between one of the many gain stages(the curve looks a bit tight, though).
Its basically a 'frown' curve, which looks like this:
Attachments
Hi,
I have a passive parametric mid EQ design that can do that curve. It goes into the NFB line:
http://www.ckamps.com/ToneGeeks/ToneGeeks/index.php?topic=16.msg166#msg166
Feel free to use (commercial ok too with attribution) 🙂
Cheers!
I have a passive parametric mid EQ design that can do that curve. It goes into the NFB line:
http://www.ckamps.com/ToneGeeks/ToneGeeks/index.php?topic=16.msg166#msg166
Feel free to use (commercial ok too with attribution) 🙂
Cheers!
- Status
- Not open for further replies.