Hello everyone
I thought I would start my membership on this forum with a couple of questions. I am about to start a aleph 1.2 diy project this autumn.
I know there are a couple of sites around the net where you can buy pcbs for aleph products. But I would like to get some feedback from the pros, you guys.
Of what quality are the pcbs available? If you want "the best" audiopcbs where should I turn. Anyone willing to "custom design" ?
This aleph is my first ss diy project. And I am eager to get started, but I won´t rush in to it. I want to have all corners covered first.
best regards Johan from sweden
I thought I would start my membership on this forum with a couple of questions. I am about to start a aleph 1.2 diy project this autumn.
I know there are a couple of sites around the net where you can buy pcbs for aleph products. But I would like to get some feedback from the pros, you guys.
Of what quality are the pcbs available? If you want "the best" audiopcbs where should I turn. Anyone willing to "custom design" ?
This aleph is my first ss diy project. And I am eager to get started, but I won´t rush in to it. I want to have all corners covered first.
best regards Johan from sweden
hi,
you can find the pcbs for all alephs, including aleph 1.2, at :
http://web.vip.hr/pcb-design.vip
the quality of pcbs and designs is simply awesome.
you can find the pcbs for all alephs, including aleph 1.2, at :
http://web.vip.hr/pcb-design.vip
the quality of pcbs and designs is simply awesome.
Member
Joined 2002
ahem i like this topic i am doing the way that he told me to from the instructions but many people disagree.. so read this..here is apic of my boards and ect things..
http://www.diyaudio.com/forums/showthread.php?s=&threadid=4619&perpage=15&pagenumber=2
http://www.diyaudio.com/forums/showthread.php?s=&threadid=4619&perpage=15&pagenumber=2
Member
Joined 2002
Hello,
Also, there is one other way that can be used for lower
PCB temperature, but both ways would work ok.
Best regards,
Kristijan Kljucaric
http://web.vip.hr/pcb-design.vip
Also, there is one other way that can be used for lower
PCB temperature, but both ways would work ok.
Best regards,
Kristijan Kljucaric
http://web.vip.hr/pcb-design.vip
Attachments
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- Amplifiers
- Pass Labs
- Help with aleph 1.2 pcbs