help please with kt-88 ultralinear o/p transformer

[push me pull me]

Hi everyone this is my first posting on youre forums and would just like to say a bit of a tube novice. I have a pp ultralinear output transformer in a 60w kt-88 amp but it is wired for 200 ohm output i know it has the windings for 16 ohm 8 ohm etc but do not have the knowledge on how to rewire it i have a picture and have marked the windings which i checked with a multimeter each winding appears to be approx 0.8 ohms i am just unsure on what to link for output feedback etc can any one help please many thanks

 

[taj]

My guess:
C = common (or ground)
CT= 4, 8 16 ohm "center taps"
200z = as marked.

This is not authoritative, just a guess.

..Todd

 

[push me pull me]

Thanks for youre help Todd ill give it a try tommorow (look for the blue flash on the horizon about midday) ha ha cheers gavin