Help!!!One analogue output of my CEC CD3300 just went silent!!!

[Sakharov]

Hi Guys,

Big problem here 🙁 one of the analogue outputs of my cec cd 3300 just went silent

Any idea regarding the reason? I've just replaced the laser and was enjoying the new one and suddenly it went silent from one output.

Any help would be greatly appreciated

regards

 

[Mooly]

Probably something really really simple like a disconnected plug, or a solder blob on the print somewhere, or a dry on an output socket. If the worst comes to the worst and it is a real fault then its almost certain to be just around the analogue output stage.

To much of a coincidence it fails when you replace the laser. Just check for anything obvious around the output sockets and output circuitry.

 

[Sakharov]

Thankx....

I really thinking that maybe is the analogue stage🙁 because it went lower in volume (I tough it was the amp) and then nothing...

🙁helpppppppppppp

 

[Sakharov]

Mooly!!!!!!!yes, yes!!!!!!!!!

you are great indeed a small cable was jammed between the transport and the chassis!!!Its working...I love this forum.

Thank you very much

back to Hifi nirvana again

 

[Mooly]

🙂 Great to hear its all fixed.