Perry, do you have any schematics for this driver board? I have a generic schematic for the mainboard and P.S. driver board, but it simply shows the pins of the output driver board and end there. Not the board itself.
I have your repair manual, Ive searched through a little and didn't see one in there, but im the first to admit I usually miss the things right in front of my face fairly often.
I have your repair manual, Ive searched through a little and didn't see one in there, but im the first to admit I usually miss the things right in front of my face fairly often.
The smaller 2-ic board is on the class d type-3. They're very similar.
Make sure that you check the driver IC to confirm that it was not damaged during installation. That seems to be a big problem, that and people buying the ICs from distributors that don't store and package them properly.
Make sure that you check the driver IC to confirm that it was not damaged during installation. That seems to be a big problem, that and people buying the ICs from distributors that don't store and package them properly.
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.