Hello,
I was given a Portable One years ago, at this point i had no clue about deeper audio measurements, but over the years i learned myself how to use this device and how to measure the circuits i work on. It became a very important part of my workbench.
I repair solid state amps, analog mixing desks, passive speaker crossovers. I also do a lot overhauls on used analog studio gear. Sometimes kind of prototyping, building speakers and little audio devices.
I am at a point where it is a huge PITA that i cannot A/B my measurements or save and recall them later. I know there are possibility's (adaptor + software solutions ) to print from the P1, but they are kind of expensive for what they are.
Long story short: the local broadcaster sells System One's. They have 3 different versions an I'am not sure which one to take. I know that Udo's interfacing cable work's with APIB, but as you can see on the photos, the other System One connectors are marked with "Digital Interface".
Digital Interface = APIB?
The costs including Udo's Interface would be about 1k€ which is a decent price i guess. The switching units are about 100€/pc.
I would prefer this model:
They also have this one (upper device)
And this:
As well as, this switching units:
Any comments and help very appreciated!
Thank you,
Georg
I was given a Portable One years ago, at this point i had no clue about deeper audio measurements, but over the years i learned myself how to use this device and how to measure the circuits i work on. It became a very important part of my workbench.
I repair solid state amps, analog mixing desks, passive speaker crossovers. I also do a lot overhauls on used analog studio gear. Sometimes kind of prototyping, building speakers and little audio devices.
I am at a point where it is a huge PITA that i cannot A/B my measurements or save and recall them later. I know there are possibility's (adaptor + software solutions ) to print from the P1, but they are kind of expensive for what they are.
Long story short: the local broadcaster sells System One's. They have 3 different versions an I'am not sure which one to take. I know that Udo's interfacing cable work's with APIB, but as you can see on the photos, the other System One connectors are marked with "Digital Interface".
Digital Interface = APIB?
The costs including Udo's Interface would be about 1k€ which is a decent price i guess. The switching units are about 100€/pc.
I would prefer this model:
They also have this one (upper device)
And this:
As well as, this switching units:
Any comments and help very appreciated!
Thank you,
Georg
Hi soix
The 22A is Analog only, 222A is Analog + DSP, 322A is Dual Domain, The interface is APIB, if G (GPIB & APIB), if S (SERIAL & APIB)
Join LinkedIn, Classic AP Audio Systems Group LA, Email me duke.aguiar@ieee.org (http://www.sound-logic-la.com) for more info
Duke
The 22A is Analog only, 222A is Analog + DSP, 322A is Dual Domain, The interface is APIB, if G (GPIB & APIB), if S (SERIAL & APIB)
Join LinkedIn, Classic AP Audio Systems Group LA, Email me duke.aguiar@ieee.org (http://www.sound-logic-la.com) for more info
Duke
