Hi to all experts out there.I just become a pair of LL1689 SE transformers rated for 30mA,now becouse I have with the Lundahls and specific with this typ no experience,plese if someone with experience can tell me if I could use this in the line stage whivh shematics is below.Im using now just simply capacitor pio on ouput.But in my design Im not using 100R resistor on B+ and also no 4.7uf mkp cap from B+ to 6n6p cathode.I will be heppy about any help.
Attachments
Sure you can. Probably Alt. P is most suitable.
The 100r and 4,7uF are not needed and simply enhancements/tweaks by Troels. You can always try that later if you want.
The 100r and 4,7uF are not needed and simply enhancements/tweaks by Troels. You can always try that later if you want.
Last edited:
Hi Bas,thank you verry much.I will try this out and mount the transformers this weekend in my line stage.Will report back how it will sound.Thanks man😉
The output connection in #1 is wrong. XLR pin 1 shall connect to the metal case directly and not to the output transformer. Pin 1 is the shield, it´s not part of the signal transmission.
