Greetings from Australia! I'm so glad to see so many others have enjoyed these speakers, looking at some of the threads here.. I've had my set for well over 10 years and have only just started experiencing an issue with them. figured I'd try my luck here. They turn on fine from the control pod but after a minute or two, the sound stops and the screen on the control pod goes mostly black (the blue led still is on). I have to turn the sub power switch off and back on and theyll work again for about the same amount of time. I did some research and found the easiest possible fix is replacing the fuse in the back. I went and got an identical fuse from Jaycar audio and replaced with but the same issue persists! i couldnt see this specific problem in any of the searches ive done but was hoping for some help on potentially fixing without needing to get too crazy and replace or bypass the control pod. thanks!
We may not be the majority but the site is Australian.
This topic is about a DIY fix but not a DIY product. Multi-Way isn't the worst place to ask your question but you might have more luck in the Line Level or Solid State subforums. Hopefully you can drill down and discover more specifically what's wrong.
This topic is about a DIY fix but not a DIY product. Multi-Way isn't the worst place to ask your question but you might have more luck in the Line Level or Solid State subforums. Hopefully you can drill down and discover more specifically what's wrong.