having the worst time locatig the cdm-t g12 socket bulb and ballast. Any help?

[18wheeler]

Just digged out an old post:

http://www.diyaudio.com/forums/showthread.php?postid=200210#post200210

poohbear actually bought it for 11$.

in the website poohbear provided, it is listed under Metal Halide DR H019:

An externally hosted image should be here but it was not working when we last tested it.

 

[jtbullet]

many thanks will check to see if its in!

 

[18wheeler]

CDM-T/942 150W at ebay.de:

http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&item=3173468532

 

[nmd_sb]

anyone find out the specs on that HTI150 bulb posted by a user before, it looked smaller than the cdm-t

 

[18wheeler]

I think HTI is GE version of CDM-T. UHI is Ushio brand. They have the same specs. I saw them listed in a cross-reference table.

 

[18wheeler]

Europe: 4.98 euro:
http://www.solded.com/boutique/product_info.php?products_id=381&language=en

Singapore: $$6.50
http://shop.store.yahoo.com/lidra-sg/lfahl14.html

UK: 6.40 pound:
http://www.rexelsenate.co.uk/lamp_site/discharge-gear.html

An externally hosted image should be here but it was not working when we last tested it.

or use two single pin holders to make your own:
http://www.northamericalights.com/socks06.htm

An externally hosted image should be here but it was not working when we last tested it.

An externally hosted image should be here but it was not working when we last tested it.

Someone said DYS lamps use the same holder as G12. If so, this QCJ-11 Socket should fit:
http://www.mbelectronics.com/parts-sockets.htm

An externally hosted image should be here but it was not working when we last tested it.

 

[ace3000_1]

I think HTI is GE version of CDM-T

CMH is what mines got and its a GE cdm-t, comes under constant colour too, CMH = ceramic metal halide.

Trev

 

[mathias]

Osram has the same CDM-T 150 W lamp, but they call it Powerstar HCI-T, but if you can get that in a 4200K version, I don´t know. A 150W HQI is smaller than a CDM-T lamp, but it has the same data.

The G12 base/holder is easy to make. Two halogen holder and some screws.

 

[18wheeler]

CDM-T 150w on ebay.de. 25 euro for two.

http://cgi.ebay.de/ws/eBayISAPI.dll?ViewItem&item=3174570722&category=18619

 

[18wheeler]

G12 socket group buy

the Lidra-sg store now ship this socket to US. The price for socket is very reasonable at $6.50, but the shipping is high at $22 for one socket. The shipping is the same for 8 sockets, and increases to $30 for orders of 9-16 sockets. I would like to setup a group buy so we can get it for ~$10. once it arrives, it can be shipped out by first class mail which is about $1-$1.50 to most place in US.

If you are interested please email me at 18wheeler@earthlink.net.

An externally hosted image should be here but it was not working when we last tested it.

 

[Skeeter-MTI]

18wheeler

"or use two single pin holders to make your own:"

How does one alter two single pin fixtures to create the bulb scoket?

I've got a few of these type bulb holders and would like to know please.😀

Thank you

 

[18wheeler]

Look at mathias' picture above.

 

[go77306]

Re: Here ya go.

Ballast: http://www.hellolights.com/15unmagm81ba.html

G12 base: http://store.yahoo.com/lidra-sg/lfahl14.html

Bulb: http://www.productionadvantageonline.com/lamps.htm#METAL HALIDE LAMPS

seems the ballast is M81 (double ended HQI bulb), can this be used to drive CDM-T lamp?

 

[go77306]

or use two single pin holders to make your own:
http://www.northamericalights.com/socks06.htm

An externally hosted image should be here but it was not working when we last tested it.

An externally hosted image should be here but it was not working when we last tested it.

[/B]

Don't buy these! there are too big for the lamp! I bought 2 of them and they are too big!!!