there was a post from 2018 10 05, but it's gone now. Poster was looking for help with Hammond 125 ESE.
Here's some info which may help.
I'm using the Hammond 125ESE in a PSE 6BX7
I like it very much, but it took a few months for the sound to improve.
Here are some that use this output transformer:
JE Labs JE Labs Arkiv (up to 2008): JE Labs Simple 45/2A3
MAE1 Norwegian Wood
MAE-SET1 | Flickr
Tom Schlangen's Homepage - Tube DIY Pages Tom Schlangen's Homepage - Tube DIY Pages
SE EL34 schematic HELP: from two 6SL7's to One? see post#10
https://blog.boozhoundlabs.com/a-vacuum-tube-hi-fi-primer-979678e829eb
http://www.hovirinta.fi/audio/putki...stimet/SE/2xECL86_stereo/2xECL86_SE_proto.htm
commercial product
https://www.specimenproducts.com/product/single-ended-octoblock-tube-amplifier/
--
Hammond 125e (the little universal ot, also used in guitar amps)
Don Garber (R.I.P) www.enjoythemusic.com/magazine/equipment/1212/garber_fi_x4.htm
Here's some info which may help.
I'm using the Hammond 125ESE in a PSE 6BX7
I like it very much, but it took a few months for the sound to improve.
Here are some that use this output transformer:
JE Labs JE Labs Arkiv (up to 2008): JE Labs Simple 45/2A3
MAE1 Norwegian Wood
MAE-SET1 | Flickr
Tom Schlangen's Homepage - Tube DIY Pages Tom Schlangen's Homepage - Tube DIY Pages
SE EL34 schematic HELP: from two 6SL7's to One? see post#10
An externally hosted image should be here but it was not working when we last tested it.
https://blog.boozhoundlabs.com/a-vacuum-tube-hi-fi-primer-979678e829eb
http://www.hovirinta.fi/audio/putki...stimet/SE/2xECL86_stereo/2xECL86_SE_proto.htm
commercial product
https://www.specimenproducts.com/product/single-ended-octoblock-tube-amplifier/
--
Hammond 125e (the little universal ot, also used in guitar amps)
Don Garber (R.I.P) www.enjoythemusic.com/magazine/equipment/1212/garber_fi_x4.htm
The circuit shown by Chris is from Angela Instruments a few years back. Anyone thinking of building one should be aware that the 880 ohm resistor on the cathodes of the EL34s is wrong. Change to a 470 to 500 ohm or you'll be running the tubes too "cold".
When this circuit came out the biggest Hammond, without going to their "mega" iron was the 125ESE. Now there's a FSE and GSE. Might be a worthwhile upgrade.
Steve
When this circuit came out the biggest Hammond, without going to their "mega" iron was the 125ESE. Now there's a FSE and GSE. Might be a worthwhile upgrade.
Steve
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.