• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.
  • Home
  • Group Buys
  • Group Buy: Linear Systems LSK389 / LSK170 JFETs (i.e. Toshiba 2sk389/2sk170 subs)

Group Buy: Linear Systems LSK389 / LSK170 JFETs (i.e. Toshiba 2sk389/2sk170 subs)

Jump to Latest
#185
AndrewT said:
I have returned Sheldon D back to 4 pieces.
and left the edit error corrected.
I cannot see a second Sheldon!!!
Click to expand...

You can't see me, because I have no idea how to edit the Wiki. The boxes on the edit page have no obvious connection to the boxes on the Wiki, and I don't want to start a sequence of errors that I have to unwind. If someone can point me to the methodology, I'll try it. The edit instructions are not helpful.

Sheldon

Actually, 5 will do with a couple spare to blow up, so 5 instead of 10.
 
#186
luvdunhill said:
one other question, perhaps Scott can answer as I know he's planning on using the LSK389 SOIC devices as well. What are you going to do with pins 3 and 7 (I'm assuming they are tied to the substrate), are they just not connected? Also, are you planning doing anything special under the device itself, such as pouring a small heatsink or anything?

AndrewT:

I cannot seem to find the post from Anatech that you referenced. I searched for Anatech as poster and BJT as a key word. Any ideas?
Click to expand...

I might clamp a heat sink on top if needed. Don't know yet what I'll try with the LSK389's, for now they're stock.
 
#189
Hi luvdunhill

I am in the wiki for 30 each TO-92 and SOIC grade B LSK170. Apparently I am one of the unreachable ones.

I am Larry Nicks I am also larrynicks. I think my private messaging is turned on. I tried to send you a message, but was not allowed because I am still moderated despite being a member for something like two years - I don't post much.

So - I am here. I have money. What now?
 
#190
larrynicks said:
Hi luvdunhill

I am in the wiki for 30 each TO-92 and SOIC grade B LSK170. Apparently I am one of the unreachable ones.

I am Larry Nicks I am also larrynicks. I think my private messaging is turned on. I tried to send you a message, but was not allowed because I am still moderated despite being a member for something like two years - I don't post much.

So - I am here. I have money. What now?
Click to expand...

after logging in, click "user cp" at the top right of the screen, the "edit options", then ensure "enable private messaging" is set to "yes". I think this should do it. Let me know when it's set 🙂
 
#194
Have you tried sending me a private message? Does it not work? If so, maybe it is because I am still under moderation. Do you have any influence with the moderator? I am really not a terrorist waiting to blow up the forum - and I really have been registered for 3 1/2 years.

I don't want to post my email address in the open, but I will if I must. This is becoming ridiculous.

If I am still moderated, you may not see this post for a few hours.
 
#195
luvdunhill said:
oops, I thought that was the same thing as e-mail. Perhaps the option you want is "Allow Bulletin Board Administrators and Moderators To Send You Email Notices?"
Click to expand...

No, the PM is not working until we get new software. Emailing through the forum works fine provided the member has it activated. Both of you should see the email button at the bottom of your post page.

larrynicks said:
Do you have any influence with the moderator?
Click to expand...

Yes, a little. Look above my avatar.

I am really not a terrorist waiting to blow up the forum - and I really have been registered for 3 1/2 years. [/B]
Click to expand...


It's a matter of how many posts before you are released from moderation. When viewing the posts in the queue, we don't have access to when you registered, just the number of posts. Usually you are released after five.

I don't want to post my email address in the open, but I will if I must. This is becoming ridiculous. [/B]
Click to expand...


Alas, moderation is a necessary evil but no need to post your address on the web.

If I am still moderated, you may not see this post for a few hours. [/B]
Click to expand...


You are no longer moderated. Go forth and multiply young man. (oops, I see you're retired.) Go forth and spread wisdom.
 
#198
update:

The following people have paid:

coloradosound
shallbehealed
mlloyd1
ken.berg
TS Lo
jimt
Jim Hamley
hayenc
npapp
spind
JoeyDD
claudio
sonidos
wct
jonclancy
Conrad Hoffman
len_scanlan
ZUM911
Looneytunes
agent.5
mako1138
bobgroger
chertk
bkisiel
walt h
dankop
leadfinger
jims
finneybear
sidiy
Scott Wurcer
AndrewT
tritosine
RogerGustavsson
Sheldon
christer
relder
jpo
genome
Deek
Rjay
satoru
LarryNicks
pilli

The following people haven't paid:

jackinnj
EDDELARUE
JohnathanBright
stoolpigeon
rolandong
metalman
mikewong
cobra2
audiotony
kraljmatjaz
Scott Stansbury
flg
klm1
pingrs
damohpi
jeje

I have no way to contact the following people:

pencoat
Rambi

78% of devices are paid for.

This group buy will definitely close at:

Monday, August 25th 2008 @ 8:00 AM CST (UTC-6)

Thank you!
 
You must log in or register to reply here.
  • Home
  • Group Buys
  • Group Buy: Linear Systems LSK389 / LSK170 JFETs (i.e. Toshiba 2sk389/2sk170 subs)
Top Bottom