• These commercial threads are for private transactions. diyAudio.com provides these forums for the convenience of our members, but makes no warranty nor assumes any responsibility. We do not vet any members, use of this facility is at your own risk. Customers can post any issues in those threads as long as it is done in a civil manner. All diyAudio rules about conduct apply and will be enforced.

Group Buy for the Through Hole Folded Cascode CEN IV boards

Jump to Latest
#258
@RickRay - If you have a look again, the left stacker matches with left IV board, but you need to reverse the faces of the stacker boards. The capacitors etc on the stacker will then hang off the bottom and right will match with right and left with left.

Look at it this way - finished build, IV and stacker board assembled will have silkscreen on the boards facing outwards "FC CEN IV" and "V2.1R" and the stacker board will have "FC CEN IV SK3" and "V3.0R" again facing outwards.

See in the build guide how the finished ones I did are sitting on a piece of mdf? Well there is a hole in that MDF that accommodates the caps etc on the stacker board.

I've added a few photos below that hopefully give a good idea of this - bear in mind I used slightly different caps in the prototype so they look a bit odd aligned at an angle.
 

Attachments

  • IMG_20221213_110034-01.jpeg
    IMG_20221213_110034-01.jpeg
    65.7 KB · Views: 118
  • IMG_20221213_110049-01.jpeg
    IMG_20221213_110049-01.jpeg
    50.4 KB · Views: 128
  • IMG_20221213_110059-01.jpeg
    IMG_20221213_110059-01.jpeg
    55 KB · Views: 124
  • Like
Reactions: Paddy Garcia
You must log in or register to reply here.
Top Bottom