GB3 will only happen is there are 40 subscribers.
MOSFETs are prioritised for GB1 EU subscribers, then GB2 EU subscribers, then GB2 Rest of the world.
US & Canada subscribers should organise their own GB / group matching.
https://www.diyaudio.com/community/...or-fc-cen-iv-through-hole.392487/post-7181478
Patrick
MOSFETs are prioritised for GB1 EU subscribers, then GB2 EU subscribers, then GB2 Rest of the world.
US & Canada subscribers should organise their own GB / group matching.
https://www.diyaudio.com/community/...or-fc-cen-iv-through-hole.392487/post-7181478
Patrick
+mosfet for me too (gb2)Progress has been made.
Boards are here now, and measuring of mosfets has been done. I'll need a bit of time to actually pull matches together and work out some of the background details. But we are moving forward and that is good. Work is a bear at present, so I think it will be another week before I get this moved to the next step
Thanks Patrick
1000r and 7v and I'm getting 5mA and VGS 1.993v on my first test.
Should I adjust R to raise the mA or turn up the voltage on my lab PSU to reach 7ma?!
Edit.....used a 1k trimmer as per Fran's manual and now dialled in 7v and 7mA.!
1000r and 7v and I'm getting 5mA and VGS 1.993v on my first test.
Should I adjust R to raise the mA or turn up the voltage on my lab PSU to reach 7ma?!
Edit.....used a 1k trimmer as per Fran's manual and now dialled in 7v and 7mA.!
Last edited:
Many thanks to everyone who has supplied their details so far for GB2. Its really helpful when you send on the details promptly, it is a big help when updating the spreadsheet I use for tracking everything in the background.
If you haven't got around to sending on your paypal, name and shipping address, and indicating if you want mosfets send them on to me sooner rather than later.
Right now I am aiming to send paypal requests towards next weekend.
Fran
If you haven't got around to sending on your paypal, name and shipping address, and indicating if you want mosfets send them on to me sooner rather than later.
Right now I am aiming to send paypal requests towards next weekend.
Fran
I have volunteered to buy and distribute matched mosfet sets for the US and Canada ONLY. Please sign up at this post: https://www.diyaudio.com/community/...en-iv-through-hole-us-and-canada-only.392522/
All my N channel tested out to between 1.85 and 2.05vgs. Just done the P channel and they're much lower. Between 570 and 600mV. Is this right?
Hi Fran,
I sent you a PM concerning the GB2 MFets. Know you are busy, but did not want any confusion about you supplying or RickRay supplying the MFets. Please let me know what suits you the best going forward.
Regards,
MM
I sent you a PM concerning the GB2 MFets. Know you are busy, but did not want any confusion about you supplying or RickRay supplying the MFets. Please let me know what suits you the best going forward.
Regards,
MM
General update folks:
@d to the g @ihear21khz @kumori - I don't seem to have contact info for you guys - email, shipping address. Maybe you might drop me a pm with the info.
So today is the closing date for GB1 members to let me know if they want mosfets and most have done so at this point. I will be organising paypal invoices and getting their mosfets ready to ship over the weekend. Once I have that substantially complete, I will issue invoices for GB2 people.
I reckon I have all requests and clarifications now sorted other than the few above.
@d to the g @ihear21khz @kumori - I don't seem to have contact info for you guys - email, shipping address. Maybe you might drop me a pm with the info.
So today is the closing date for GB1 members to let me know if they want mosfets and most have done so at this point. I will be organising paypal invoices and getting their mosfets ready to ship over the weekend. Once I have that substantially complete, I will issue invoices for GB2 people.
I reckon I have all requests and clarifications now sorted other than the few above.
Fran I think I am good with matching my MOSFETs so you can take me off the list if that helps others get some of these from you.
Hi all,
A short update:
All paypal invoices have now gone out for GB2 including mosfets where requested. Please use family and friends when paying, or add 2e if the system doesn't allow you to do that. The good news is that I have (just) enough mosfets to fill all requests, many thanks to @RickRay for looking after builders on the other side of the big pond.
If you want to check the amount (in case I made a mistake):
Each set of boards = 24e
Each set of mosfets = 12e
Shipping = 9e
I don't have paypal or shipping addresses yet for @kumori and @ihear21khz. The plan here is to get these sent out later in the week, probably Thursday.
fran
A short update:
All paypal invoices have now gone out for GB2 including mosfets where requested. Please use family and friends when paying, or add 2e if the system doesn't allow you to do that. The good news is that I have (just) enough mosfets to fill all requests, many thanks to @RickRay for looking after builders on the other side of the big pond.
If you want to check the amount (in case I made a mistake):
Each set of boards = 24e
Each set of mosfets = 12e
Shipping = 9e
I don't have paypal or shipping addresses yet for @kumori and @ihear21khz. The plan here is to get these sent out later in the week, probably Thursday.
fran
- Home
- Group Buys
- Group Buy for the Through Hole Folded Cascode CEN IV boards