Hi Tomas,
I looked at Moneybookers, but their fee for non-European merchants is almost identical to PP, so no advantage for me. I would have to sign up, go through their verification process, and it would take time.
You are concerned naturally about cost of WU; but consider this, normally, as the merchant, I pay the fee, not you. I am reluctant to go through additional administration for just one customer; more may wish to use this service, and if there are more than say five, then I will register.
I will put you on the list, however, and thank you for your order.
Cheers,
Hugh
I looked at Moneybookers, but their fee for non-European merchants is almost identical to PP, so no advantage for me. I would have to sign up, go through their verification process, and it would take time.
You are concerned naturally about cost of WU; but consider this, normally, as the merchant, I pay the fee, not you. I am reluctant to go through additional administration for just one customer; more may wish to use this service, and if there are more than say five, then I will register.
I will put you on the list, however, and thank you for your order.
Cheers,
Hugh
Hi Folks,
Latest List:
4P Sonocon Germany
4P Woody MA USA
4P Col_S Thirroul NSW Aust
4P RKH CO USA
2P Syklab HK China
4P Taniknight Safety Beach Victoria Aust
2P Sasha UK
2P PeteMcK Sydney Aust
2P Eparsons Woodinville WA USA
2P Ipolyakov CA USA
4P Mohora NY USA
2P Johnny2Bad ? Canada
2P Peter Rekkers The Hague Netherlands
2P Tome Macedonia (payment?)
4P Westley Matthews NC USA
Thanks Peter, Tomas, Westley; we are building the list! This is 44pcbs to this point. Mohora, could you please let me know which country you reside in? Another ten pcbs and I pull the lever for manufacturing another 100 pcb, so, I encourage those interested.....
Cheers,
Hugh
Latest List:
4P Sonocon Germany
4P Woody MA USA
4P Col_S Thirroul NSW Aust
4P RKH CO USA
2P Syklab HK China
4P Taniknight Safety Beach Victoria Aust
2P Sasha UK
2P PeteMcK Sydney Aust
2P Eparsons Woodinville WA USA
2P Ipolyakov CA USA
4P Mohora NY USA
2P Johnny2Bad ? Canada
2P Peter Rekkers The Hague Netherlands
2P Tome Macedonia (payment?)
4P Westley Matthews NC USA
Thanks Peter, Tomas, Westley; we are building the list! This is 44pcbs to this point. Mohora, could you please let me know which country you reside in? Another ten pcbs and I pull the lever for manufacturing another 100 pcb, so, I encourage those interested.....
Cheers,
Hugh
Last edited:
Let's ramp up this GB, it's lagging. This is a lovely amp with outstanding sonics, I strongly recommend any audiophile to partake. It's easy and inexpensive to make, and well sorted.
I don't believe we yet have all the guys who missed out on the first GB here either.....
Cheers,
Hugh
I don't believe we yet have all the guys who missed out on the first GB here either.....
Cheers,
Hugh
what would the sound be like? can you give more details about this?
If you are offering partially complete boards can you not offer me a ready made module on this occasion as an exception? I will still have to source the parts which will take further effort to do if some are hard to find. Then solder the parts and the potential worry that something may go wrong. There's less worry with a module. My plan is to use my AKSA chassis to mount them.
If you are offering partially complete boards can you not offer me a ready made module on this occasion as an exception? I will still have to source the parts which will take further effort to do if some are hard to find. Then solder the parts and the potential worry that something may go wrong. There's less worry with a module. My plan is to use my AKSA chassis to mount them.
Hi Westley,
Many thanks, you are on the list!
Prof,
You're back!! I missed you.... was beginning to feel almost at peace with the world!
I'm not able do a module, I'm flat out like a lizard drinking at present building commercial amps and designing for volume manufacture, I'm sorry.
Cheers,
Hugh
Many thanks, you are on the list!
Prof,
You're back!! I missed you.... was beginning to feel almost at peace with the world!
I'm not able do a module, I'm flat out like a lizard drinking at present building commercial amps and designing for volume manufacture, I'm sorry.
Cheers,
Hugh
Prof,
I cannot describe the sound. Thousands have tried, and the results are always comical.
And what is more, the sound varies with each and every recording you play; the big variable is always recording quality.
Neither can I make exceptions, I'm running a business and this group buy is a low profit exercise I can ill afford to spend too much time on. I have two car engines I'm rebuilding at present, a hifi show to staff next week, numerous orders and a general level of malaise that affects my output.
Please, let's make our virtual reintroduction casual and undemanding, OK?
Hugh
I cannot describe the sound. Thousands have tried, and the results are always comical.
And what is more, the sound varies with each and every recording you play; the big variable is always recording quality.
Neither can I make exceptions, I'm running a business and this group buy is a low profit exercise I can ill afford to spend too much time on. I have two car engines I'm rebuilding at present, a hifi show to staff next week, numerous orders and a general level of malaise that affects my output.
Please, let's make our virtual reintroduction casual and undemanding, OK?
Hugh
a hifi show to staff next week
Hugh,
Do you have a display at the hifi show on the weekend of the 21st-23rd Oct at the Marriott Hotel?
If so I'll see you there.
Tani.
Yes, Tani,
The NAKSA 100 and 70 will on display, playing as well. Room 416, the Grover Notting/Aspen stand.
I look forward to meeting you and will chat over high priced coffee!
Here's the FetZilla GB2 listing:
4P Sonocon Germany
4P Woody MA USA
4P Col_S Thirroul NSW Aust
4P RKH CO USA
2P Syklab HK China
4P Taniknight Safety Beach Victoria Aust
2P Sasha UK
2P PeteMcK Sydney Aust
2P Eparsons Woodinville WA USA
2P Ipolyakov CA USA
4P Mohora NY USA
2P Johnny2Bad ? Canada
2P Peter Rekkers The Hague Netherlands
2P Tome Macedonia (payment?)
4P Westley Matthews NC USA
4P TG3 Seattle WA USA
2P Ray MD USA
2P KP93300 Malaysia
2P Meanman1964
TG3, Ray, KP93300, Meanman1964
You are now all on the list, many thanks, now up to 54 boards, I have delayed the order, but it's going in this coming Monday.
Cheers,
Hugh
The NAKSA 100 and 70 will on display, playing as well. Room 416, the Grover Notting/Aspen stand.
I look forward to meeting you and will chat over high priced coffee!
Here's the FetZilla GB2 listing:
4P Sonocon Germany
4P Woody MA USA
4P Col_S Thirroul NSW Aust
4P RKH CO USA
2P Syklab HK China
4P Taniknight Safety Beach Victoria Aust
2P Sasha UK
2P PeteMcK Sydney Aust
2P Eparsons Woodinville WA USA
2P Ipolyakov CA USA
4P Mohora NY USA
2P Johnny2Bad ? Canada
2P Peter Rekkers The Hague Netherlands
2P Tome Macedonia (payment?)
4P Westley Matthews NC USA
4P TG3 Seattle WA USA
2P Ray MD USA
2P KP93300 Malaysia
2P Meanman1964
TG3, Ray, KP93300, Meanman1964
You are now all on the list, many thanks, now up to 54 boards, I have delayed the order, but it's going in this coming Monday.
Cheers,
Hugh
Last edited:
- Status
- This old topic is closed. If you want to reopen this topic, contact a moderator using the "Report Post" button.
- Home
- More Vendors...
- AKSA
- Group Buy #2 - FETZILLA