Hugh,
I will let you know a friend of mine is coming over and want to build some amps maybe this amp is something for him.
Hugh I will take that extra pair of boards if they are still available. Also I have a question, on your parts list, you show p3 as 500R, while the board is labeled as 200R for P3. Which is the correct value for P3? Thanks
everett
everett
Hi Everett,
Noted on the two extra boards!!
You can in fact use either 200R or 500R, as a trimpot can be adjusted correctly in either case. Buy the one you can easily get, but 200R is quite adequate and will give you enhanced sensitivity.
Meanman, have to be careful not to overpromise, as this group buy is now formally closed. Have you got yours going at this stage? I realise it all takes time and this is a busy time of year with family however!
Cheers,
Hugh
Noted on the two extra boards!!
You can in fact use either 200R or 500R, as a trimpot can be adjusted correctly in either case. Buy the one you can easily get, but 200R is quite adequate and will give you enhanced sensitivity.
Meanman, have to be careful not to overpromise, as this group buy is now formally closed. Have you got yours going at this stage? I realise it all takes time and this is a busy time of year with family however!
Cheers,
Hugh
Thanks Hugh, I am in the process of stuffing the boards now. I am waiting on a few parts that won't come until next week. I will take the boards with parts if they are available. Just let me know when to send the funds. Thanks
everett
everett
Arrival, Colorado USA
Thanks Hugh!
My boards arrived today... though I suspect they were here earlier. All arrived safe and intact.
Thanks for the doing this for the DIY Community.
Cheers,
Ryan
PS I sent you an e-mail as well.
Thanks Hugh!
My boards arrived today... though I suspect they were here earlier. All arrived safe and intact.
Thanks for the doing this for the DIY Community.
Cheers,
Ryan
PS I sent you an e-mail as well.
Ryan,
My sincere pleasure, thank you for your interest, and for informing me of safe arrival. It's a long way across the pond....
A very happy new year to you and to your family, and of course to all others following this little FetZilla project!
Everett,
Not just yet, don't send the funds until I have the parts from Digikey/Mouser!! Thanks for the post,
Cheers,
Hugh
My sincere pleasure, thank you for your interest, and for informing me of safe arrival. It's a long way across the pond....
A very happy new year to you and to your family, and of course to all others following this little FetZilla project!
Everett,
Not just yet, don't send the funds until I have the parts from Digikey/Mouser!! Thanks for the post,
Cheers,
Hugh
Hugh,
Received the boards in good condition.
Thank you very much for this great offer.
Regards,
Igor
Received the boards in good condition.
Thank you very much for this great offer.
Regards,
Igor
Thanks Igor!
News: I'm expecting the semis in three days and will then be in a position to mail out the remaining boards. Again, apologies for delays, this is not such a wonderful period to be ordering parts from another continent!
Cheers,
Hugh
News: I'm expecting the semis in three days and will then be in a position to mail out the remaining boards. Again, apologies for delays, this is not such a wonderful period to be ordering parts from another continent!
Cheers,
Hugh
Sasha,
Semis arrived one day ago. Give me this weekend and I shall complete the boards and mail out the rest of the orders!!
Sorry for delays, Xmas and all that jazz.....
Hugh
Semis arrived one day ago. Give me this weekend and I shall complete the boards and mail out the rest of the orders!!
Sorry for delays, Xmas and all that jazz.....
Hugh
Hi Hugh,
I was on the order list for PCB and parts , am I still eligible ? If so how do I make payment ?
I was on the order list for PCB and parts , am I still eligible ? If so how do I make payment ?
Yes, you can make payment, Sandro.
To my email on paypal, under Aspen Amplifiers P/L.
Price is $AUD68 for two boards, with the small fets included, and postage.
Thank you for your interest,
Hugh
To my email on paypal, under Aspen Amplifiers P/L.
Price is $AUD68 for two boards, with the small fets included, and postage.
Thank you for your interest,
Hugh
FOLKS
those who have expressed interest in FetZilla boards Group Buy #2 but have not yet paid, please do so in the next day or so as I'm ready to post out.
I'm very sorry for delays, which racked up over the Christmas period and then were made worse by a succession of very hot days here. I don't enjoy my workshop in very hot weather (100F+) but now cool weather has arrived and they are done......
My apologies for the long wait. However, reports are coming in, this is a corker of an amp, so get ready to sling some solder!
My email address is the Aspen Amplifier P/L paypal account. Prices as discussed; $AUD58 for boards alone, $AUD68 with the small semiconductors, and with smd voltage amp mounted and tested on the board.
Cheers,
Hugh
those who have expressed interest in FetZilla boards Group Buy #2 but have not yet paid, please do so in the next day or so as I'm ready to post out.
I'm very sorry for delays, which racked up over the Christmas period and then were made worse by a succession of very hot days here. I don't enjoy my workshop in very hot weather (100F+) but now cool weather has arrived and they are done......
My apologies for the long wait. However, reports are coming in, this is a corker of an amp, so get ready to sling some solder!
My email address is the Aspen Amplifier P/L paypal account. Prices as discussed; $AUD58 for boards alone, $AUD68 with the small semiconductors, and with smd voltage amp mounted and tested on the board.
Cheers,
Hugh
Thank you to Sandro, Sasha and Joz.
All received, will notify you when posted out.
Cheers,
Hugh
All received, will notify you when posted out.
Cheers,
Hugh
- Status
- Not open for further replies.