GP in chassis rca and speaker post, anyone?

[jrsun]

Hi Julio,

each stick have 2 holes on 4 sides, but only 2 adjacent sides can be screw in for connecting two adjacent heat sink.
Also the stick is directional, only one direct will fit.
Hope it will help.


BTW, still waiting for 2nd shipment.

David,
Sorry, no OEM part number available

 

[porfi4ever]

Thanks Russell, I figure it out watching a pic that you post. I have the cases already assemblied. thanks

 

[Doovieman]

Hi Julio,

each stick have 2 holes on 4 sides, but only 2 adjacent sides can be screw in for connecting two adjacent heat sink.
Also the stick is directional, only one direct will fit.
Hope it will help.


BTW, still waiting for 2nd shipment.

David,
Sorry, no OEM part number available

Thanks Russell...do you know the manufacture? Is it WTB? Any chance you know their part number? Thanks,

Doovieman

 

[jrsun]

the manufacture? the one manufacture name brand connector.
WBT ? Do you know how expensive they are for the similiar (not the same) ones? check the following
http://www.partsexpress.com/pe/showdetl.cfm?&DID=7&Partnumber=093-556
price is for single one not pair

 

[jrsun]

Finally 2nd shipmet is here!
Please email me
1. your preferred method of payment, paypal from bank account (NOT CREDIT CARD), personal check or certified check
2. shipping address
I'll contact you for the total price including shipping based on first order first serve and stock at hand. Thanks!

 

[Doovieman]

Just got them...thanks for everything...they look great.

Doovieman

 

[Elkaid]

Got them too !

Thank you very much 🙂

Emmanuel

 

[jrsun]

Great !
Hope they sound as good as they look! I thought someone is going to tell us. Except those already booked, most of 2nd shipment except 11 pairs of RCAs are gone. No binding posts left. Please let me know if you are interested in those RCAs. Thanks !

 

[dswiston]

I wasn't in on the initial ordering, but I was wondering, how much would shipping to Illinois be for 4 pairs. If its reasonable put me down for four pairs. I'll fire off an e-mail to you if you post the shipping info here, or you can e-mail me with the shipping info and I'll respond that way.

Thanks.

 

[Detract]

Did you recieve my last email?

Keen on the a couple of pairs if you can arrange an enclosure as well.

Also do you accept CC Paypal?

Cheers

 

[jrsun]

I used up all the priority boxes in the post offices next to my office and home. I went to the 3rd one this morning and will send out the rest of orders tomorrow. For those I do not reply your email, I do not have any stock for you. Sorry !

 

[badman]

Just got 'em

I just got them, and they look great. I'm not a fan of WBT connectors (except the RIDICULOUSLY GOOD Nextgens) but for the money, these are great.

 

[motherone]

jrsun,

Not sure if you have any of the RCA's left (I inquired about them earlier via this thread and PM). If you do, I'm interested in 4 pairs. PM me if you have any left.

Thanks,

Mike

 

[Ed LaFontaine]

Round Three, Maybe?

Maybe jrsun will do a third round. They went so fast I considered a purchase too late. Snooze and lose

 

[Peter Daniel]

I received the RCAs today, and the quality is very high. Hard to say how they sound, but just from looking at them, they compare with the best out there. And the caps were included 😉

 

[Doovieman]

1 rca pair

If anyone has 1 pair of rca that they don't want, I'd like to buy it. Thanks,

Doovieman

 

[homer09]

sizing?

Anybody know what the size specs are for these RCA's and binding posts? I want to use them as a replacement in a commercial amp but i want to avoid drilling larger holes. so basically i need an idea of the following dimensions:

- what is the overall diameter of the RCA's? (so i could know the minimum spacing between them)

- what is the diameter of the RCA shaft that crosses through the chasis panel? (so i could know if they fit in the stock holes)

- what is the diameter of the binding post's shaft that crosses through the chasis panel?

I good estimate would suffice. thanks!