I got the following parts and want to use it to build an amplifier, but do not have any circuits, any suggestions what I can use these for?
3 x 300x126x130 heatsinks (SK108)
1 x 15-0-15 400VA toroidal
14 x 10,000uf 40V caps
3 x 300x126x130 heatsinks (SK108)
1 x 15-0-15 400VA toroidal
14 x 10,000uf 40V caps
This project has a two channel circuit board available that has provisions for bridging on board.
http://sound.westhost.com/project3a.htm
Bridged with your transformer it should be able to do 100W/4R
http://sound.westhost.com/project3a.htm
Bridged with your transformer it should be able to do 100W/4R
Hi DJK
Thanx for the repsonse - the only 1 🙁
According to the proposed circiut, you need +/-35V for this amp and I can only deliver +/-20V. Will this be enough, I do not need a 100Watt amp. Or any other possible usage for my parts?
Thanx for the repsonse - the only 1 🙁
According to the proposed circiut, you need +/-35V for this amp and I can only deliver +/-20V. Will this be enough, I do not need a 100Watt amp. Or any other possible usage for my parts?
Well, what do you want to make? Its sorta hard to help if we don't know what we are helping with.. 🙂
- Status
- Not open for further replies.