Re: Great!
I'm pretty sure Frank just snagged these off the net (i've seen them both before), if so what you see is what you get. URLs to those sites would probably be more useful.
dave
Rino odorico said:
I'm pretty sure Frank just snagged these off the net (i've seen them both before), if so what you see is what you get. URLs to those sites would probably be more useful.
dave
PRINTING
Rino,
If I send you the same stuff it's not going to solve the printing problem.
Try to open them in a graphics program and split the pic into 2 or more sections.
Save the separate parts,enlarge them so you can read all that's on it and when printing those enlarged parts make sure your printer is set to "fit to page".
That should solve it.
Cheers,😉
Rino,
If I send you the same stuff it's not going to solve the printing problem.
Try to open them in a graphics program and split the pic into 2 or more sections.
Save the separate parts,enlarge them so you can read all that's on it and when printing those enlarged parts make sure your printer is set to "fit to page".
That should solve it.
Cheers,😉
NOT IN THIS CASE.
Dave,
On this occasion you put them up here so they're local.
I usually have to resort to urls since I have this problem uploading anything from my local disk.
The site is protected against mirroring so no luck there and printing from it won't solve the clarity problem either.
Just for info,😉
Dave,
On this occasion you put them up here so they're local.
I usually have to resort to urls since I have this problem uploading anything from my local disk.
The site is protected against mirroring so no luck there and printing from it won't solve the clarity problem either.
Just for info,😉
Cool,
Cool, thanks Frank.
Can't wait to try some of this out. I can see it now...a mad scientist in the making...mmwaahhh, ah hahaha (tyring to type in my best scary voice)
Rino Odorico
Cool, thanks Frank.
Can't wait to try some of this out. I can see it now...a mad scientist in the making...mmwaahhh, ah hahaha (tyring to type in my best scary voice)
Rino Odorico
Re: NOT IN THIS CASE.
It is a little trickier to get them, but i just drag them out of the browser on to my desktop (it may be trickier under windows), change the *.php to *.jpg or &*.gif and open it in PhotoShop (or graphic converter or back in my browser).
The ones i posted have also been cleaned up a bit (they are actually gifs) from what Frank sent.
dave
fdegrove said:
It is a little trickier to get them, but i just drag them out of the browser on to my desktop (it may be trickier under windows), change the *.php to *.jpg or &*.gif and open it in PhotoShop (or graphic converter or back in my browser).
The ones i posted have also been cleaned up a bit (they are actually gifs) from what Frank sent.
dave
WINDOZ
Hey,
Anything a Mac can a window can too.😀
Works in Windoz too thanks to Mickeysoft.
Sorry Dave 1-1?
Cheers,😎
Hey,
Anything a Mac can a window can too.😀
Works in Windoz too thanks to Mickeysoft.
Sorry Dave 1-1?
Cheers,😎
NO WORRIES.
Rino,
Dave knows where I'm coming from so don't loose sleep over the little games here.
BTW is the power of a single PP pair enough for you?
Cherio,
John,
Better that than boasting about.....😀
Rino,
Dave knows where I'm coming from so don't loose sleep over the little games here.
BTW is the power of a single PP pair enough for you?
Cherio,
John,
Better that than boasting about.....😀
Power...
Hey Frank,
Hum, 2 PP El34's...is that enough power? I would have to say yes, unless you have something up your sleave. Now the question (as I sip on my morning coffee) is, should I even ask...yes I should.
Ok Frank, I'll ask...why, what do you have in mind?
Rino Odorico
😀
Hey Frank,
Hum, 2 PP El34's...is that enough power? I would have to say yes, unless you have something up your sleave. Now the question (as I sip on my morning coffee) is, should I even ask...yes I should.
Ok Frank, I'll ask...why, what do you have in mind?
Rino Odorico
😀
WHAT IS WAS THINKING
Hi,
Well, I was thinking about a multiple PP of El34s but we better forget about it.
When I think I run a pair of self-made bookshelf speakers with a set of 2A3s PSE putting out a couple of Watts to more than satisfying levels....
No,I thought also that you could add a volumecontrol at the input
with a bypass connection straight in.
So for CD you could connect to that and for sources requiring a preamp you could then use the direct connection.
After all it is easier and less costly to drive speaker cable of some length than to use long interconnects.
Cheers,😉
Hi,
Well, I was thinking about a multiple PP of El34s but we better forget about it.
When I think I run a pair of self-made bookshelf speakers with a set of 2A3s PSE putting out a couple of Watts to more than satisfying levels....
No,I thought also that you could add a volumecontrol at the input
with a bypass connection straight in.
So for CD you could connect to that and for sources requiring a preamp you could then use the direct connection.
After all it is easier and less costly to drive speaker cable of some length than to use long interconnects.
Cheers,😉
Dave,
Please keep us informed on your vacuum-state EL-34 project. I gathered the parts to build one but got distracted. Have you heard a built unit? It looks like it could be something special.
Jam
Please keep us informed on your vacuum-state EL-34 project. I gathered the parts to build one but got distracted. Have you heard a built unit? It looks like it could be something special.
Jam
MISSING PARTS
Hi,
Not much is missing really.
Add the CCS and you're there.After all it would work without it or have I missed out on something?
Cherio,😉
Hi,
Not much is missing really.
Add the CCS and you're there.After all it would work without it or have I missed out on something?
Cherio,😉
jam said:
I haven't heard one, Dice45 has heard one that would be close. I have a number of other amps that are also candidates for this treatment. The 1st one out the gate will probably be a Scott LK48 with EL84s.
dave
SMALL TELETUBES...
Hi,
A ccs treated EL84?
Sound like breakfast in bed to me.
Of the small power tubes I must say I prefer the EL84 over a lot of them till you hear the EL86.
Shear magic...
Ciao, 😉
Hi,
A ccs treated EL84?
Sound like breakfast in bed to me.
Of the small power tubes I must say I prefer the EL84 over a lot of them till you hear the EL86.
Shear magic...
Ciao, 😉
Re: SMALL TELETUBES...
I'm hoping so. If the 1st one works out, i have Dyna iron for a set of monoblocs.
I haven't run across this one yet... have you heard the SV83?
dave
fdegrove said:
I'm hoping so. If the 1st one works out, i have Dyna iron for a set of monoblocs.
I haven't run across this one yet... have you heard the SV83?
dave
EL84
Hello,
Yes I have toyed with that one.
It isn't bad at all but i still prefer the NOS E84L/7320 made by Siemens.
The russian E84LM,the military one,is excellent as well if you want a bit more top end and speed.
The EL86/6CW5 requires a different OPT but can really sound impressive.
An excellent noval power tube.
Ciao, 😉
Hello,
Yes I have toyed with that one.
It isn't bad at all but i still prefer the NOS E84L/7320 made by Siemens.
The russian E84LM,the military one,is excellent as well if you want a bit more top end and speed.
The EL86/6CW5 requires a different OPT but can really sound impressive.
An excellent noval power tube.
Ciao, 😉
Re: EL84
Got any "maps" in your collection? From what i could quickly gather this would use an OPT in the same general impedance range as a 2A3?
dave
fdegrove said:
Got any "maps" in your collection? From what i could quickly gather this would use an OPT in the same general impedance range as a 2A3?
dave
EL86
Hello,
Most of what I found are Philips designs,OTL for a 800 Ohm speaker.
Naturally an OPT could be used for 16-8-4 Ohm impedances.
I've owned an OTL amp like that and much to my surprise it did drive my 8 Ohm speaker very well.
http://www.cs.uu.nl/~gerard/RadioCorner/Articles/SerBalOut.htm
DATASHEET
INTERESTING STUFF FOR ALL OF US
AN ITALIAN SITE I OFTEN USE (PROTECTED ZONE)
And there must be more I could dig up....😉
I've seen prices on this tube from 5.00USD to 20.00USD depending on sources and manufacturer.
Cheers,😎
Hello,
Most of what I found are Philips designs,OTL for a 800 Ohm speaker.
Naturally an OPT could be used for 16-8-4 Ohm impedances.
I've owned an OTL amp like that and much to my surprise it did drive my 8 Ohm speaker very well.
http://www.cs.uu.nl/~gerard/RadioCorner/Articles/SerBalOut.htm
DATASHEET
INTERESTING STUFF FOR ALL OF US
AN ITALIAN SITE I OFTEN USE (PROTECTED ZONE)
And there must be more I could dig up....😉
I've seen prices on this tube from 5.00USD to 20.00USD depending on sources and manufacturer.
Cheers,😎
- Status
- Not open for further replies.