Good News!
the shop manage to found some left over from the factory. there are about 70 pieces or more(didn't count cause they are in a seal bag) at the shop when I checked this afternoon.
the question now is should I get the whole lot and run the risk of loosing money with not enough buyer/taking years to clear them...
or, I only get the wheels when there are buyer, with the risk of running out of stock...
also, with the rapid depreciation of USD, I will only take SGP--about S$22.50/pc from now on.
in the mean time, I do have a few wheels. email me if you are interested.
the shop manage to found some left over from the factory. there are about 70 pieces or more(didn't count cause they are in a seal bag) at the shop when I checked this afternoon.
the question now is should I get the whole lot and run the risk of loosing money with not enough buyer/taking years to clear them...
or, I only get the wheels when there are buyer, with the risk of running out of stock... also, with the rapid depreciation of USD, I will only take SGP--about S$22.50/pc from now on.
in the mean time, I do have a few wheels. email me if you are interested.
As most of the forumer who need it had already gotten from me, there aren't many request lately.
Once I clear the remaining 5 pieces of CDM4 wheels, I will not be getting/selling anymore.
Once I clear the remaining 5 pieces of CDM4 wheels, I will not be getting/selling anymore.
Ghianni said:
that may be a good idea. most of the request were came from Europe, if anyone willing to take over, pls drop me an email.
just a reminder, it may take months to clear a dozen pieces...thus i will only charge the wheels cost + postage.
Philips CD-850II CDM4 tray gear
Hi EPOS
I'm looking for a tray gear wheel to my old tweaked Philips CD-850II.
Part number is 4822 528 81329
I live in Europe, Portugal, near Lisbon!
Is there any chance to buy one or two gear wheels!
How much will it cost, with mail?!
Thank you
Hi EPOS
I'm looking for a tray gear wheel to my old tweaked Philips CD-850II.
Part number is 4822 528 81329
I live in Europe, Portugal, near Lisbon!
Is there any chance to buy one or two gear wheels!
How much will it cost, with mail?!
Thank you
I think still have one or two left, price is still the same:
SGP$22.50 for 1st piece, add SGP$10 for another.
email me to confirm.
epos(at)mail.com
SGP$22.50 for 1st piece, add SGP$10 for another.
email me to confirm.
epos(at)mail.com
Sorry EPOS, but i can't mail to you!I 'm still under observation of the "Big Bother"!
What about the mail expenses, are these included or not in the first wheel price. And the transaction, how its done?
Best regards
Paulo
What about the mail expenses, are these included or not in the first wheel price. And the transaction, how its done?
Best regards
Paulo
Thanks Mr. Moderator!
I'm sorry because i wrote "Bother" instead of "Brother"
All i've to say is that you aren't "Bother" me!
Have a long and prosper life!
Paulo
😀
I'm sorry because i wrote "Bother" instead of "Brother"
All i've to say is that you aren't "Bother" me!
Have a long and prosper life!
Paulo
😀
PALUSE said:Sorry EPOS, but i can't mail to you!I 'm still under observation of the "Big Bother"!
What about the mail expenses, are these included or not in the first wheel price. And the transaction, how its done?
Best regards
Paulo
actually you could, just check my previous post for email address. in fact, the answer for all the above questions are there...
price is including postage, paypal only.
The geared wheel for opening the CD tray on my Rotel RCD970BX has stripped its teeth. I can still open the tray manually, but I would like to fix it properly.
Does anyone know what the replacement part is and where can I get one?
Many thanks,
Terence Lowe.
Does anyone know what the replacement part is and where can I get one?
Many thanks,
Terence Lowe.
Hi EPOS
"Elvis is in the building!"
The wheel arrived yesterday, 6th of November of 2008!
It is installed and is working!
Since i have to open the CD-850II, i make a reenforcement of the +5V power line with a 3300uF cap, after the regulator IC, and change the +15V and -15V fuse resistors by 1mH mini coils with 12 Ohms DC resistance.The original fuse resistors have 22 Ohms and feed the opamps!
In year 2000 i made an opamp upgrade from OPA2604 to OPA2134. In 1996 i had done a vast update with lots of ELNA audio grade capacitors (Red metallic can) and OPA2604.
I still like this machine, a lot!
Thank you very much!
"Elvis is in the building!"
The wheel arrived yesterday, 6th of November of 2008!
It is installed and is working!
Since i have to open the CD-850II, i make a reenforcement of the +5V power line with a 3300uF cap, after the regulator IC, and change the +15V and -15V fuse resistors by 1mH mini coils with 12 Ohms DC resistance.The original fuse resistors have 22 Ohms and feed the opamps!
In year 2000 i made an opamp upgrade from OPA2604 to OPA2134. In 1996 i had done a vast update with lots of ELNA audio grade capacitors (Red metallic can) and OPA2604.
I still like this machine, a lot!
Thank you very much!
PALUSE said:Hi EPOS
"Elvis is in the building!"
The wheel arrived yesterday, 6th of November of 2008!
It is installed and is working!
Since i have to open the CD-850II, i make a reenforcement of the +5V power line with a 3300uF cap, after the regulator IC, and change the +15V and -15V fuse resistors by 1mH mini coils with 12 Ohms DC resistance.The original fuse resistors have 22 Ohms and feed the opamps!
In year 2000 i made an opamp upgrade from OPA2604 to OPA2134. In 1996 i had done a vast update with lots of ELNA audio grade capacitors (Red metallic can) and OPA2604.
I still like this machine, a lot!
Thank you very much!
glad to know it arrived safely.
if only I have the electronic knowledge to improve my player. 🙂
gabanyayaya said:
No !
The CDM is totally different.
(I have never had a fault with the gears in the CD63.)
Andy
Hello epos,
Do you still have CDM4 wheels in stock?
If so what would be the price including shipping and handling to Canada?
Regards,
Michel
Do you still have CDM4 wheels in stock?
If so what would be the price including shipping and handling to Canada?
Regards,
Michel
- Status
- Not open for further replies.