BIB arrived
Hi Tea-Bag,
Just wanted to let you know, that board arrived safe and sound! Thanks!
Hi Tea-Bag,
Just wanted to let you know, that board arrived safe and sound! Thanks!
Hi Tea Bag,
I add myself to the GB for 3 Reflector-D boards and 3 full kits and 2 BIB LV Shunt boards. Hope they will be available soon. Thanks
I add myself to the GB for 3 Reflector-D boards and 3 full kits and 2 BIB LV Shunt boards. Hope they will be available soon. Thanks
Full news in a few days, but wanted to put it out there that I will run a group buy closing at the end of November, so I can get some boards out hopefully right at the end of the year - or shortly thereafter.
Okay GB is open until the close of November. So if your interested in some boards, now is the time to order up. I have sent a Private Message out to everyone on the current GB list, and will continue to do that for new comers - but here is a taste of it.
The GB for the Salas board is open for payment up until 11:59PM EST 11-30-2014.
Payment is via PayPal invoice only. You will need to send me your paypal email via private message for me to start this process. Then I will invoice the parts you requested from the spreadsheet. If you reply to this email - cut out some of the existing text, otherwise the message is too big.😉
Customs forms
DO NOT ask for me to fudge up a customs form with really low amount. These are based on reasonable wholesale price.
Shipping
Continues to rise via USPS.
In general boards are a set costs, and mini kits are built into the shipping costs and larger full kits are 10.00 to ship. Starting price for shipping is 7.00 for just a small board and can rise from there.
BIB
The BIB is a low voltage regulator. It includes 2 positive and 1 negative regulator per board. These have been upgraded to 2mm thickness from 1.6mm. Board production costs have risen , cost is 25.00 per board.
The builders guide is available here in the first post, as well as a current and voltage setting calculator to get the other parts.
http://www.diyaudio.com/forums/grou...-salas-sslv1-1-bib-shunt-reg.html#post2571174
The minikits for the BiB are available for 12.50each. They do not include all parts to complete a section of the board.
More details on the Minikits are in the Minikit link below at the bottom of this message.
Here is a picture of the board. Each one includes two positive and one negative rail board. They are scored and can be broken apart

MiniKit BOM section. This links goes to full details of all the parts included in the kits and there respective positions on the board.
http://www.diyaudio.com/forums/blogs/tea-bag/741-salas-board-minikits-full-kits.html
The GB for the Salas board is open for payment up until 11:59PM EST 11-30-2014.
Payment is via PayPal invoice only. You will need to send me your paypal email via private message for me to start this process. Then I will invoice the parts you requested from the spreadsheet. If you reply to this email - cut out some of the existing text, otherwise the message is too big.😉
Customs forms
DO NOT ask for me to fudge up a customs form with really low amount. These are based on reasonable wholesale price.
Shipping
Continues to rise via USPS.
In general boards are a set costs, and mini kits are built into the shipping costs and larger full kits are 10.00 to ship. Starting price for shipping is 7.00 for just a small board and can rise from there.
BIB
The BIB is a low voltage regulator. It includes 2 positive and 1 negative regulator per board. These have been upgraded to 2mm thickness from 1.6mm. Board production costs have risen , cost is 25.00 per board.
The builders guide is available here in the first post, as well as a current and voltage setting calculator to get the other parts.
http://www.diyaudio.com/forums/grou...-salas-sslv1-1-bib-shunt-reg.html#post2571174
The minikits for the BiB are available for 12.50each. They do not include all parts to complete a section of the board.
More details on the Minikits are in the Minikit link below at the bottom of this message.
Here is a picture of the board. Each one includes two positive and one negative rail board. They are scored and can be broken apart

MiniKit BOM section. This links goes to full details of all the parts included in the kits and there respective positions on the board.
http://www.diyaudio.com/forums/blogs/tea-bag/741-salas-board-minikits-full-kits.html
12v 2.5a
If I want to build a 12v 2.5a reg, what would be the mosfet combination?
irf9610 and irf9530?
Thanks
If I want to build a 12v 2.5a reg, what would be the mosfet combination?
irf9610 and irf9530?
Thanks
Especially the 9610 is out of the question. You got to carefully check SOA and thermal calc for 9530 and 9530 combo on a given sink chosen. Maybe IRF9640-9640 with RθJC=1 better or go IRFP9240-9240 with short cable extensions and chunky sink. Like those used in hot-rod DCB1.
Reminder. Group Buy Closes in one week.
Please sign up, and PM me your paypal details and I can send you an invoice.
Please sign up, and PM me your paypal details and I can send you an invoice.
Hello guys,
has anybody a bom fot the "Salas SSLV1.1 BiB shunt reg" for TDA1541A, i`m a non professional and need some help.
regards
Aron
has anybody a bom fot the "Salas SSLV1.1 BiB shunt reg" for TDA1541A, i`m a non professional and need some help.
regards
Aron
Check out the SSLV1.1 builds thread to figure out and/or post any further tech questions there.
http://www.diyaudio.com/forums/power-supplies/192625-sslv1-1-builds-fairy-tales.html
http://www.diyaudio.com/forums/power-supplies/192625-sslv1-1-builds-fairy-tales.html
Last 2 days for group buy. Please pay up to ensure you get the board and parts you need. Stock ordered will be limited
Last minute order
Hi Mike:
Sorry for the last minute add on. Was just thinking about a project, and realized I need a pair of + and - kits. Then looked, and lo and behold, for once I was just ahead of the deadline instead of just behind. Please send an invoice and it will be promptly paid.
Best,
Jon
Hi Mike:
Sorry for the last minute add on. Was just thinking about a project, and realized I need a pair of + and - kits. Then looked, and lo and behold, for once I was just ahead of the deadline instead of just behind. Please send an invoice and it will be promptly paid.
Best,
Jon
Any idea when or if there might be another GB? I missed that there was going to be an end date I thought it was an ongoing listing, my mistake for not understanding how they [GB] worked and I was offline for several days due to the holiday and missed notices. Thanks for any info on future possibilities for GB. Thank you.
Steve
Steve
Last edited:
Any idea when or if there might be another GB? I missed that there was going to be an end date I thought it was an ongoing listing, my mistake for not understanding how they [GB] worked and I was offline for several days due to the holiday and missed notices. Thanks for any info on future possibilities for GB. Thank you.
Steve
Steve, I currently will have some excess boards. I will PM you the GB details.
Tea
Hi Teabag!
Sorry for being late on this again, but do you have extra miniKits for "Positive LV" and "Negative LV" that I can get? I need 4 Positive LV and 2 Negative LV. Thanks!
Abe
Sorry for being late on this again, but do you have extra miniKits for "Positive LV" and "Negative LV" that I can get? I need 4 Positive LV and 2 Negative LV. Thanks!
Abe
Hi Teabag!
Sorry for being late on this again, but do you have extra miniKits for "Positive LV" and "Negative LV" that I can get? I need 4 Positive LV and 2 Negative LV. Thanks!
Abe
Hi Abe,
For now I can only do two of each. until I get more of the bipolar transistors stocked. Let me know via IM if your interested.
Hi Abe,
For now I can only do two of each. until I get more of the bipolar transistors stocked. Let me know via IM if your interested.
PM Sent!
Thanks.
Abe
Any chance you still have one?Steve, I currently will have some excess boards. I will PM you the GB details.
Tea
- Home
- Group Buys
- GB Thread for Salas SSLV1.1 BiB shunt reg